Electroplating of Ni-P Alloys from Ni-Citrate Bath.
نویسندگان
چکیده
منابع مشابه
Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys
a r t i c l e i n f o Zn–Ni, Zn–Co and Zn–Ni–Co coatings were electrodeposited on mild steel from an acidic chloride bath containing p-aminobenzenesulphonic acid (SA) and gelatin. These additives changed the phase content in the coatings, most likely as a result of their adsorption at the surface of the cathode. The effect of gelatin was more pronounced than that of SA. The Faradaic efficiency ...
متن کاملRelativity and Magnetism in Ni-Pd and Ni-Pt Alloys
We show that the differences in the magnetic properties of Ni-Pd and Ni-Pt alloys arise mainly due to relativity. In particular, we find that the local magnetic moment of Ni increases with the addition of Pd in Ni-Pd while it decreases with the addition of Pt in Ni-Pt, as found experimentally, only if relativity is present. Our analysis is based on the effects of relativity on (i) the spin-pola...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملOxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملAb initio simulations of molten Ni alloys
Christopher Woodward, Mark Asta, Dallas R. Trinkle, James Lill, and Stefano Angioletti-Uberti Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, Ohio 45433-7817, USA Department of Materials Science and Engineering, University of California, Berkeley, California 94720, USA and Department of Chemical Engineering and Materials Science, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1992
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.43.353