Electroplating of Copper on Low Carbon Steel from Alkaline Citrate Complex Baths
نویسندگان
چکیده
منابع مشابه
Failure Investigation of Hydrogen Blistering on Low-strength Carbon Steel
The current study assesses the root causes of hydrogen blisters on low strength carbon steel equipment. For this purpose, some experiments including hardness test, non-destructive test (NDT), metallography, and fractograpghy are conducted. The microstructure of two blisters is assessed by means of optical microscopy and scanning electron microscopy (SEM). The microstructural studies show that t...
متن کاملNickel removal from electroplating industry wastewater: A bamboo activated carbon
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sour...
متن کاملAdsorption Equilibrium of Polyethylene Glycol in the Copper Electroplating Solution on Activated Carbon.
Polyethylene glycol (PEG) used as a brightening and stabilization agent at the concentration of 30 mg dm(-3) is a major organic additive in the copper electroplating solution. Activated carbon, Calgon Filtrasob 400, is used as the adsorbent to remove the PEG from the used electroplating solution in order to broaden the appeal of recycling it. The equilibrium of adsorption is attained within 14 ...
متن کاملEffect of Aluminum on Microstructure and Thickness of Galvanized Layers on Low Carbon silicon-Free Steel
In hot dip galvanizing, several parameters such as chemical composition of coating bath, immersion time and surface roughness of specimens could affect microstructure and properties of coating. In this article, the effect of aluminum content, immersion time and surface roughness on structure and properties of alloy layers have been investigated. Specimens of low carbon silicon-free steel with d...
متن کاملBiosortion of Copper from Electroplating Effuluent and It’s Equilibrium Studies
The present work is concerned to remove Cu using the biosorption potential of fungal biomass Aspergillus oryzae. The dry fungal biomass was used to optimize various parameters such as contact time, initial metal ion concentration, pH, biomass loading etc. A maximum of 91% Copper removal was observed in 5 mg/L initial Copper metal ion concentration using dry Aspergillus oryzae biomass. The perce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2020
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2019-747