Electrophoretic deposition of orientation-controlled zeolite L layer on porous ceramic substrate
نویسندگان
چکیده
منابع مشابه
Electrophoretic deposition and corrosion behavior study of aluminum coating on AZ91D substrate
Aluminum coating was prepared on AZ91D magnesium alloy substrate using the electrophoretic deposition (EPD) method in absolute ethanol solvent. In order to determine the optimal concentration of AlCl3.6H2O additive, the zeta potential and size of particles in the suspension were measured in the presence of different concentrations of AlCl3.6H2O. The results showed that an appropriate coating is...
متن کاملMulti-step Electrophoretic Deposition of α-Al2O3 Nanoparticles on Carbon Substrate (TECHNICAL NOTE)
in the present study, electrophoretic deposition (EPD) was used to obtain dense and crack-free layers of Al2O3 on carbon substrate. Microstructural study of the obtained layers by scanning electron (SEM) and optical microscopy (OM) approved that crack-free layers can be obtained by EPD technique. According to obtained results, isopropanol is a suitable media to obtian compact layers which is at...
متن کاملElectrophoretic Deposition of Hydroxyapatite
The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...
متن کاملTitanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process
The aim of the present research is to convert bioinert surface of NiTi to bioactive and biocompatible surface. In order to develop a bioactive and corrosion resistant film on NiTi, electrophoretic deposition process was done and TiO2 particles were deposited on the NiTi surface. Suspensions including TiO2 particles were prepared using a mixture of acetone and n-butanol (0%, 30%, 60%, 80% and 10...
متن کاملAffectability of ceramic nanoparticles of different compound from surface characteristics in AC electrophoretic deposition
Surface characteristic of particles is one of the main parameters controlling the properties of deposited layer in electrophoretic deposition. To modify the surface characteristic of particles, one of the methods is the addition of additives to the suspensions of powder-solvent. There are many reports dealing with the effect of surface characteristics of particles on uniformity and pattern of d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2013
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.121.370