Electrophoretic deposition of graphene on basalt fiber for composite applications

Electrophoretic Deposition of Hydroxyapatite

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

Electrophoretic Deposition: Fundamentals and Applications

This article presents a study on the growth process for the template-based growth of TiO2 nanorods by sol electrophoretic deposition, through both experiment and simulation. Uniformly sized nanorods of approximately 45–200 nm in diameter and 10–60 μm in length can be grown over large areas with near unidirectional alignment. The nanorods have the desired stoichiometric chemical composition and ...

Electrophoretic deposition: fundamentals and applications.

Preparation of Nanohydroxyapatite-Carbon Nanotube Composite Coatings on 316L Stainless Steel Using Electrophoretic Deposition

Nanohydroxyapatite-carbon nanotube composite coatings were deposited via electrophoretic deposition (EPD). AISI 316L stainless steel and ethanol were used as substrate and dispersing medium, respectively. 5%wt carbon nanotube (CNT) was used as reinforcing phase. Uniform and macrocrack-free coatings were obtained both for hydroxyapatite (HA) and HA-5%wt CNT coatings. Scanning electron micros...

A review on fundamentals and applications of electrophoretic deposition (EPD)

This review encompasses the fundamental aspects of electrophoretic deposition technique, factors influencing the deposition process, kinetic aspects, types of EPD, the driving forces, preparation of electrophoretic suspension, stability and control of suspension, mechanisms involved in EPD, multicomponent/composite deposition, drying of deposits obtained by EPD. Numerous applications including ...