Electrophoretic Deposition and the Deposition Mechanism of Tl-2223 Superconducting Powder

Electrophoretic Deposition of Hydroxyapatite

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

electrophoretic deposition of hydroxyapatite

the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...

Electrophoretic deposition of biomaterials.

Electrophoretic deposition (EPD) is attracting increasing attention as an effective technique for the processing of biomaterials, specifically bioactive coatings and biomedical nanostructures. The well-known advantages of EPD for the production of a wide range of microstructures and nanostructures as well as unique and complex material combinations are being exploited, starting from well-disper...

Electrophoretic Deposition: Fundamentals and Applications

This article presents a study on the growth process for the template-based growth of TiO2 nanorods by sol electrophoretic deposition, through both experiment and simulation. Uniformly sized nanorods of approximately 45–200 nm in diameter and 10–60 μm in length can be grown over large areas with near unidirectional alignment. The nanorods have the desired stoichiometric chemical composition and ...

Electrophoretic deposition: fundamentals and applications.