Electroosmotic pumps for microflow analysis

Porous glass electroosmotic pumps: theory.

This paper presents an analytical study of electroosmotic (EO) pumps with porous pumping structures. We have developed an analytical model to solve for electroosmotic flow rate, pump current, and thermodynamic efficiency as a function of pump pressure load for porous-structure EO pumps. The model uses a symmetric electrolyte approximation valid for the high-zeta-potential regime and numerically...

Electroosmotic pumps with electrochemically active electrodes

Electroosmotic flow pumps with polymer frits

Electroosmotic flow (EOF) pumps with flow rates on the order of 1 ml/min have been designed and fabricated. These pumps use EOF to propel liquid solutions in a compact system with no moving parts. The pumping chamber is filled with densely packed non-porous silica particles, and the particle bed is held in place using two polymeric porous frits. The pump frame is made of acrylic, the frits are ...

Porous glass electroosmotic pumps: design and experiments.

An analytical model for electroosmotic flow rate, total pump current, and thermodynamic efficiency reported in a previous paper has been applied as a design guideline to fabricate porous-structure EO pumps. We have fabricated sintered-glass EO pumps that provide maximum flow rates and pressure capacities of 33 ml/min and 1.3 atm, respectively, at applied potential 100 V. These pumps are designe...

Electroosmotic Pumps with Frits Synthesized from Potassium Silicate.

Electroosmotic pumps employing silica frits synthesized from potassium silicate as a stationary phase show strong electroosmotic flow velocity and resistance to pressure-driven flow. We characterize these pumps and measure an electroosmotic mobility of 2.5 × 10(-8) m(2)/V s and hydrodynamic resistance per unit length of 70 × 10(17) Pa s/m(4) with a standard deviation of less than 2% even when v...