Electronic and structural characterisation of polycrystalline platinum disulfide thin films
نویسندگان
چکیده
منابع مشابه
architecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولElectronic and structural characterisation of Cu3BiS3 thin films for the absorber layer of sustainable photovoltaics
Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in ...
متن کاملStructural and electronic characterization of nanocrystalline diamondlike carbon thin films.
The origin of low threshold field-emission (threshold field 1.25 V/μm) in nanocrystalline diamond-like carbon (nc-DLC) thin films is examined. The introduction of nitrogen and thermal annealing are both observed to change the threshold field and these changes are correlated with changes to the film microstructure. A range of different techniques including micro-Raman and infrared spectroscopy, ...
متن کاملSTRUCTURAL, OPTICAL AND ELECTRONIC PROPERTIES OF In1-xYxN THIN FILMS
The study of IIIA-IIIB-V type thin films has recently been receiving a great deal of attention as possible solutions to optimize and to further engineer the electronic, optical and structural properties of optoelectronic materials. In this work we studied the influence of yttrium addition to InN films, in connection with YN band-gap, and explored the possibility of tuning the optical and electr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2020
ISSN: 2046-2069
DOI: 10.1039/d0ra07405e