منابع مشابه
Characterization of an Additive Manufactured TiAl Alloy—Steel Joint Produced by Electron Beam Welding
In this work, the characterization of the assembly of a steel shaft into a γ-TiAl part for turbocharger application, obtained using Electron Beam Welding (EBW) technology with a Ni-based filler, was carried out. The Ti-48Al-2Nb-0.7Cr-0.3Si (at %) alloy part was produced by Electron Beam Melting (EBM). This additive manufacturing technology allows the production of a lightweight part with comple...
متن کاملThe use of Electron Beam Welding in Turbomachinery Manufacturing
As demands for higher performance migrated from aircraft engines to land based gas turbines the need for EB welding came along also. The transfer of EB welding processes from relatively thin section components in aircraft turbines to land based aero derivative turbines is straightforward since the basic design and function of both aero and aero derivative components are the same or similar. How...
متن کاملStudy on electron beam butt welding of austenitic stainless steel 304 plates and its input–output modelling using neural networks
Butt welding of austenitic stainless steel 304 plates was carried out using an electron beam. Experiments were conducted for various combinations of input process parameters determined according to central composite design. Three input parameters, namely accelerating voltage, beam current, and welding speed were considered during the experiments. The weld-bead parameters, namely bead width and ...
متن کاملThe effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy
This study aimed to investigate the effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of the dissimilar joint between 17-4PH precipitation hardening stainless steel and Ti6Al4V alloy. For this purpose, the welding of these two alloys was done without an interlayer and with an interlayer of copper with a thickness of 0.8 mm. Two different...
متن کاملThe effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of dissimilar joint between 17-4PH steel and Ti6Al4V alloy
This study aimed to investigate the effect of electron beam welding parameters on the microstructural characteristics and mechanical properties of the dissimilar joint between 17-4PH precipitation hardening stainless steel and Ti6Al4V alloy. For this purpose, the welding of these two alloys was done without an interlayer and with an interlayer of copper with a thickness of 0.8 mm. Two different...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biuletyn Instytutu Spawalnictwa
سال: 2020
ISSN: 0867-583X,2300-1674
DOI: 10.17729/ebis.2020.4/1