Electron-Beam Welding for Pure Zirconium and Zircaloy-2 Alloy
نویسندگان
چکیده
منابع مشابه
Knowledge-based systems using neural networks for electron beam welding process of reactive material (Zircaloy-4)
Bead-on-plate welding of zircaloy-4 (a reactive material) plates was conducted using electron beam according to central composite design of experiments. Its predictive models were developed in the form of knowledge-based systems in both forward and reverse directions using neural networks. Input parameters considered for this welding of reactive metals were accelerating voltage, beam current an...
متن کاملCharacterization of an Additive Manufactured TiAl Alloy—Steel Joint Produced by Electron Beam Welding
In this work, the characterization of the assembly of a steel shaft into a γ-TiAl part for turbocharger application, obtained using Electron Beam Welding (EBW) technology with a Ni-based filler, was carried out. The Ti-48Al-2Nb-0.7Cr-0.3Si (at %) alloy part was produced by Electron Beam Melting (EBM). This additive manufacturing technology allows the production of a lightweight part with comple...
متن کاملOnline Monitoring of Electron Beam Welding of TI6AL4V Alloy Through Acoustic Emission
Acoustic Emission (AE) Technique is the only Non Destructive Testing (NDT) method that can be thought of to be used as an online monitoring tool for detection, location and characterization of various kinds of active defects during any process. An effective approach of quality control is defect detection during welding process itself rather than by NDT of component after welding. Weld defects g...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملPlasma Charge Current for Controlling and Monitoring Electron Beam Welding with Beam Oscillation
Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. There...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1962
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.31.44