Electron-beam modification of nitrile butadiene rubber in the fore-vacuum pressure range
نویسندگان
چکیده
Abstract We have studied the modification of nitrile butadiene rubber surface properties by pulsed and continuous electron beams generated in inert (argon, helium) chemically active (oxygen, nitrogen, air) gas atmosphere fore-vacuum range pressure (∼10 Pa). Relative measurements wear rate, friction coefficient, contact (wetting) angle sample surfaces before after beam treatment been made. found that electron-beam does not result any significant thermal damage to its surface, dependencies coefficient rate on duration a non-monotonic character. For optimal conditions, decreases factor about two.
منابع مشابه
Prediction of the lifetime of nitrile-butadiene rubber by FT-IR.
A quantitative measurement method with FT-IR was proposed for a thermal degradation analysis of nitrile-butadiene rubber (NBR). An NBR film was prepared as a model sample on a barium fluoride (BaF2) crystal plate, which was subjected to a heat treatment. The absorbances of various functional groups were measured directly by FT-IR after thermal degradation at high temperatures. By measuring the ...
متن کاملOptimization of mechanical performance of oxidative nano-particle electrode nitrile butadiene rubber conducting polymer actuator.
Present work delivers a systematical evaluation of actuation efficiency of a nano-particle electrode conducting polymer actuator fabricated based on Nitrile Butadiene Rubber (NBR). Attempts are made for maximizing mechanical functionality of the nano-particle electrode conducting polymer actuator that can be driven in the air. As the conducting polymer polypyrrole of the actuator is to be fabri...
متن کاملImproved curing conditions and mechanical/chemical properties of Nitrile Butadiene Rubber Composites Reinforced with Carbon Based Nanofillers
Multiwall carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) with contents ranging from 1 to 10 phr (part per hundred parts of rubber) were selected and then characterized to reinforce acrylonitrile butadiene rubber (NBR) based composites. Fabrication of nanocomposites were done by a novel procedure and structural analysis along with variety of mechanical and chemical tests, according to th...
متن کاملCompatibilization Efficiency of Carboxylated Nitrile Rubber and Epoxy Pre - polymer in Nitrile / Acrylic Rubber
An investigation has been made of the effects from a compatibilizer, viz. carboxylated nitrile rubber (XNBR), on several properties of nitrile rubber (NBR) and acrylic rubber (ACM) blends, including curing characteristics, mechanical, dynamic mechanical and dielectric properties. The presence of XNBR until 10 phr resulted in an improvement of the ultimate tensile properties, especially elongati...
متن کاملTransport properties of carboxylated nitrile butadiene rubber (XNBR)-nanoclay composites; a promising material for protective gloves in occupational exposures
This study was conducted in response to one of the research needs of National Institute for Occupational Safety and Health (NIOSH), i.e. the application of nanomaterials and nanotechnology in the field of occupational safety and health. In order to fill this important knowledge gap, the equilibrium solubility and diffusion of carbon tetrachloride and ethyl acetate through carboxylated nitrile b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2291/1/012025