Electromagnetic Wave Absorption Properties of Structural Conductive ABS Fabricated by Fused Deposition Modeling

Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling

Electromagnetic absorption and structural properties of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 nanocomposites

In this research, first, nanoparticles of SrFe11.98Mg0.1Sn0.1O19 hexaferrite was synthesized via sol-gel auto-combustion process and then the nanocomposites of hexagonal ferrites/perovskite with the amounts of SrFe11.98Mg0.1Sn0.1O19/BaTiO3 (50/50, 40/60, 70/30 w/w) was prepared by the ball-milling...

Analytical Modelling and Optimization of the Temperature-Dependent Dynamic Mechanical Properties of Fused Deposition Fabricated Parts Made of PC-ABS

Fused deposition modeling (FDM) additive manufacturing has been intensively used for many industrial applications due to its attractive advantages over traditional manufacturing processes. The process parameters used in FDM have significant influence on the part quality and its properties. This process produces the plastic part through complex mechanisms and it involves complex relationships be...

Dynamic Mechanical Properties of ABS Material Processed by Fused Deposition Modelling

This paper presents a study of dynamic mechanical properties of Fused Deposition Modelling (FDM) rapid prototyping processed material Acrylonitrile butadiene styrene (ABS). It involves the measurement of modulus and damping properties of the material as it is deformed under periodic stress. In this study, frequency sweep is performed in DMA 2980 equipment to determine modulus, damping and visco...

Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling With Focus on Dimensional Accuracy

Fused Deposition Modeling (FDM) parts are prone to process-related rough and wavy surfaces with stair-stepping effects whenever the parts produced have sloped or rounded geometries. These stair-stepping effects can be reduced by using a smaller slice height, but complete elimination is not possible. In this paper, FDM parts manufactured with the material ABS-M30 are finished using mass finishin...