منابع مشابه
Process Monitoring of Plasma Electrolytic Oxidation
Plasma electrolytic oxidation (PEO) is a potential technique to coat a dense ceramic oxide layer on the surface of light metals, e.g. Al, Mg or Ti. In our PEO process, Al-pieces are emerged in aqueous solutions containing dissolved silicate/alkali, e.g. KOH/NaOH and K 2 SiO 3 /Na 2 SiO 3. Using a DC-pulsed system with 20Hz, micro-arcs are induced at the surface of the pieces randomly and plasma...
متن کاملPlasma Electrolytic Oxidation Coatings on Lightweight Metals
Lightweight metals, e.g. aluminum (Al), magnesium (Mg), titanium (Ti) and their alloys are of great importance for applications in various machinery and transportation system, espe‐ cially in aerospace and automobile products due to their high strength-to-weight ratio and superior physical and chemical performances. However, their poor tribological properties, such as low wear resistance, high ...
متن کاملReview of the Soft Sparking Issues in Plasma Electrolytic Oxidation
A dense inner layer is highly valued among the surface coatings created through plasma electrolytic oxidation (PEO) treatment, because the PEO coating has been troubled by inherent porosity since its conception. To produce the favored structure, a proven technique is to prompt a soft sparking transition, which involves a sudden decrease in light and acoustic emissions, and a drop in anodic volt...
متن کاملCharacterization of Oxide Film Formed on Ck45 Steel by Plasma Electrolytic Oxidation Method
Plasma electrolytic oxidation (PEO) is the new, environmentally and cost-effective method for coating the metals. This method vastly has been studied for coating Aluminum, Titanium and Magnesium and their alloys and recently for steel. In present study, Ck45 steel samples were coated by PEO method in order to improve corrosion resistance. During this process specimens were immerged in carbonate...
متن کاملEffect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy
In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1931
ISSN: 0369-4208,2185-0909
DOI: 10.1246/nikkashi1921.52.765