Electrolytic Copper Deposition from Ammoniacal Alkaline Solution Containing Cu(I)
نویسندگان
چکیده
منابع مشابه
Copper Leaching Behavior from Waste Printed Circuit Board in Ammoniacal Alkaline Solution
A novel energy-saving hydrometallurgical recovery process for copper from electronic scrap employing the Cu(I)-ammine complex has been presented on the basis of a thermodynamic consideration. In order to experimentally explore the feasibility of the leaching stage in this process, the copper leaching behavior from a printed circuit board (PCB) in ammoniacal alkaline solutions has been investiga...
متن کاملSeparation of Copper from Chalcopyrite – Ammoniacal Leach Liquor Containing Copper, Zinc, and Magnesium by Supported Liquid Membrane
A low grade chalcopyrite ore was leached with H2O2/(NH4)2SO4 and the leach liquor contained 42.96 mol m copper, 3.52 mol m zinc and 11.23 mol m magnesium. From this leach liquor separation of copper was carried out with supported liquid membrane using LIX84I as mobile carrier. Celgard 2400, a microporous polypropylene film was used as the solid support for the liquid membrane. The effect of pH ...
متن کاملCopper recovery from ammoniacal media using hollow fibre contactors
This work aims to study the recovery of copper from ammoniacal aqueous solutions using hydrophobic propylene membrane contactors. The hydroxyoxime LIX 84-I and the β-diketone LIX 54 (both from Cognis) were used as extractants. The results obtained showed that practically all the copper content was removed from the ammoniacal feed solutions. The recovery of copper reached nearly 100% in several ...
متن کاملELECTROLYTIC RECOVERY OF COPPER FROM CHELATED WASTE STREhMS
Electroless plating is a chemical reduction process which depends upon the catalytic reduction of a metallic ion in an aqueous solution containing a reducing agent without the use of electricity (1). Cahill (2) showed that the cupric ion could be reduced autocatalytically with formaldehyde in an alkaline solution. Okinaka (3 ) established that the overall reaction of the catalytic copper platin...
متن کاملElectrochemical Deposition of γ-Phase Zinc-Nickel Alloys from Alkaline Solution
Zinc-nickel alloys with 8-15% nickel were deposited onto stainless steel for corrosion protection. Alkaline deposition conditions were utilized given that alkaline systems have been found to offer superior substrate coverage which results in better corrosion protection of the metal substrate (stainless steel) compared to acid bath depositions. This method utilizes ammonium hydroxide as the base...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2006
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.47.2076