Electrolyte Multiplexing in Electrochemical Jet Processing

Tetrabutylammonium Perchlorate electrolyte on electrochemical properties of spinel MgCo2O4 nanoparticles

Spinel magnesium Cobaltite (MgCo2O4) nanoparticles with a crystalline size in the range of ∼16 nm were prepared by a simple co-precipitation technique with NaOH as a precipitant. The formation of spinel MgCo2O4 phase was confirmed by X-ray diffraction (XRD) pattern. Scanning electron microscope (SEM) images showed that aggregated nanoplates. The elect...

An all solid-state electrochemical electrolyte analyzer.

Ion-selective electrodes have been applied to analysis of blood electrolytes with some success. However, currently available ion-selective electrode systems tend to be elaborate and expensive. We describe a clinical electrolyte analyzer in which inexpensive ion-selective electrodes are used. The elec‘trodes are in the configuration of thin wires and are all solid in construction. They may be di...

Laser Drilling Assisted with Jet Electrochemical Machining

Electrochemical Synthesis of Ammonia in Solid Electrolyte Cells

*Correspondence: Michael Stoukides, Department of Chemical Engineering, Aristotle University of Thessaloniki, Building E13, Laboratory of Electrochemical Processes, Thessaloniki 54124, Greece e-mail: [email protected] Developed in the early 1900s, the “Haber–Bosch” synthesis is the dominant NH3 synthesis process. Parallel to catalyst optimization, current research efforts are also focused...

Electrospray cone-jet breakup and droplet production for electrolyte solutions

The production of charge droplets via the electrospray of an electrolyte is experimentally and theoretically found to be a Coulombic fission phenomenon that occurs when induced space charge at the microjet interface reaches a critical density as the charge separation approaches the Bjerrum length. The field surrounding the cone is dominated by the Taylor harmonic, which is responsible for induc...