Electrokinetic Remediation of Soils Contaminated by Cationic Metals

Electrokinetic Remediation of Mercury-contaminated Soils

A series of batch tests were conducted to investigate the relative desorption potential of mercury from kaolin and glacial till soils under the effect of three extractant agents, namely, KI, NaEDTA and NaCl (all of them with a concentration of 0.1 M). These tests were conducted under different pH conditions (within a pH range between 2 and 12). Also batch tests using deionized water were perfor...

Electrokinetic remediation of oil-contaminated soils.

This investigation was undertaken to determine the factors influencing electrokinetic remediation of soils from petroleum pollutants. The remediation method was applied in two versions: (i) static and (ii) flowing, when a sample was washed with leaching solution. It was found that all the soils studied can be purified using this technique. It was also observed that the mineral and grain-size co...

Enhanced electrokinetic remediation of cadmium contaminated soils by chelating agents

Electrokinetic soil remediation by electroosmosis and ionic migration is restricted to soluble substances. At a higher pH, the soil particles sorb more heavy metals than at a lower pH and the precipitation reactions of heavy metals are promoted. Both mechanisms make heavy metals immobile, rendering cleanup more difficult and electrokinetic extraction inefficient. In this study, the effectivenes...

Remediation of heavy metals contaminated soils by ball milling.

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluate...

Final In - Situ Electrokinetic Remediation of Metal Contaminated Soils