Electrodeposition of Water Repellency Ni-P Alloy Composite Film.
نویسندگان
چکیده
منابع مشابه
Preparation of Ni-Co Alloy Foils by Electrodeposition
Electrodeposition of Ni-Co alloy foils on titanium substrate was performed in an acid chloride-sulphate bath. The influences of electrodeposition parameters such as current density, temperature, pH value, cobalt sulphate and saccharin concentration on composition and current efficiency were investigated in detail. The morphology and the microstructure of deposits were analyzed by SEM and XRD, r...
متن کاملPulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein
Watt’s bath and pulse reverse (PR) electrodeposition is used to produce spherical nickelmultiwall carbon nanotubes (Ni-MWCNT) of 2.00, 0.93, 1.63 and 6.71 μm diameter and a variety ofsize distributions. For 60 cycles, an absolute electrodeposition current of 18 A/dm2 is applied atcurrent ratios of ii = idissolution/ideposition = 0, 0.077, 0.200 and 0.368. A simple exponential equation isfitted ...
متن کاملElectroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملELECTRODEPOSITION AND CHARACTERIZATION OF Ni - Co - P - BN DISPERSION COATINGS
Functional plating such as alloys or dispersion coatings have been widely used in metal finishing industry. In general, dispersion coatings are deposited from plating baths containing suspended particles such as metal oxides, carbides, metals or organic materials,(l-3) Codeposited particles in the dispersion coatings have the remarkable influence on the properties of the deposits depending on t...
متن کاملInfluence of magnetic field on the electrodeposition of Ni–Co alloy
The electrodeposition of Ni–Co alloy from a nickel Watt’s solution in the absence and presence of a permanent parallel magnetic field (PPMF) to the plane of deposition (perpendicular to direction of current) produced a deposited layer with mostly fine grain structure. The deposited layers have been characterized by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). It was fou...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1997
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.48.939