Electrodeposition of Sn-Ag Eutectic Alloy from Methanesulfonate Bath.
نویسندگان
چکیده
منابع مشابه
Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (<0.5 mA/cm2), the c...
متن کاملInfluence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy
In this study, an addition of Ag micro-particles (8–10 lm) with a content in the range between 0 and 1.5 wt.% to Sn–9Zn eutectic solder, were examined in order to understand the effect of Ag additions as the particulate reinforcement on the microstructural and mechanical properties as well as the thermal behavior of the newly developed composite solders. Here, an approach to prepare a micro-com...
متن کاملTin, Bismuth, and Tin–Bismuth Alloy Electrodeposition from Chlorometalate Salts in Deep Eutectic Solvents
The electrodeposition of tin, bismuth, and tin-bismuth alloys from SnII and BiIII chlorometalate salts in the choline chloride/ethylene glycol (1:2 molar ratio) deep eutectic solvent was studied on glassy carbon and gold by cyclic voltammetry, rotating disc voltammetry, and chronoamperometry. The SnII-containing electrolyte showed one voltammetric redox process corresponding to SnII/Sn0. The di...
متن کاملFormation and Growth of Intermetallics around Metallic Particles in Eutectic Sn-Ag Solder
Incorporation of metallic particulate reinforcements in eutectic Sn-Ag solder re sults in the formation of intermetallic compounds (IMCs) along particulate/ solder interfaces with different morphologies. For instance, “sunflower” and “blocky faceted” IMC shapes have been observed around Ni particle reinforce ments incorporated in the eutectic Sn-Ag solder matrix. The time and tempera ture ab...
متن کاملEffects of growth rate on the physical and mechanical properties of Sn-3.7Ag-0.9Zn eutectic alloy
Sn-3.7wt.%Ag-0.9wt.%Zn alloy was directionally solidified upward under different conditions, with different growth rates (V = 3.38 220.12 μm/s) at a constant temperature gradient (G = 4.33 K/mm) and with different temperature gradients (G = 4.33 -12.41 K/mm) at a constant growth rate (V = 11.52 μm/s) by using a Bridgman-type directional solidification furnace. The microstructure was observed to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 2000
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.51.1234