Electrodepositing Ni-TiN nanocomposite Layers with Applying Action of Ultrasonic Waves
نویسندگان
چکیده
منابع مشابه
Synthesis and liquid phase sintering of TiN/TiB2/Fe–Cr–Ni nanocomposite powder
Nanostructured TiN/TiB2/Fe–Cr–Ni composite powder has been prepared via high energy ball milling. Ti and BN powders are reacted to form uniform mixture of TiN and TiB2 within 2 h of milling by a mechanically activated self-sustaining reaction (MSR). The crystallite sizes of TiN nd TiB2 are about 7 and 16 nm, respectively, after 32 h of milling. Through liquid phase sintering and optimizing the ...
متن کاملthe effect of anionic and cationic surfactants on electrodeposition of ni/tin nanocomposite coating
composite electrodeposition is a low-cost and low-temperature method, which is used to make metal matrix composite coatings. in this study the surfactant of anionic(sds) and cationic (ctab) is used as additive in composite coating of ni/tin. the results showed that the anionic surfactant caused more particles in the composite coatings. increasing sds concentration to the optimal value leads to ...
متن کاملGold/Tin Oxide Nanocomposite by Nanojoining
In this paper we report synthesis of Au-SnO2 nanocomposite by nano-joining. It involves synthesis of Au and SnO2 colloids separately followed by post irradiation of mixed Au-SnO2 colloids. We have used 532 nm and 1064 nm wavelengths of a pulsed Nd:YAG laser and different post irradiation time. The post irradiation by 532 nm laser light results in formation of Au-SnO2 nanocomposite by nanojoinin...
متن کاملUltrasonic classification of thin layers
Methods for non-destructive inspection of layered materials are becoming more and more popular as a way of assuring product integrity and quality. In this paper, we present a model-based technique using ultrasonic measurements for classification of thin bonding layers within three-layered materials. This could be, for example, an adhesive bond between two thin plates, where the integrity of the...
متن کاملParameter measurement of thin elastic layers using low-frequency multi-mode ultrasonic lamb waves
A low-frequency ultrasonic method presented in this paper is suitable for measuring any one of the four characteristic parameters, i.e., thickness, density, shear, and longitudinal wave velocities, of a thin elastic layer given the remaining three. Thickness of the thin layer is much smaller than the longitudinal wavelength of the ultrasonic wave used in the experiments. The method employs the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.01.211