Electrocoagulation as an Alternative for the Removal of Chromium (VI) in Solution

نویسندگان

چکیده

Context: The contamination of water sources by the discharge effluents contaminated with chromium (VI) is a current environmental problem because it toxic pollutant for humans, animals, plants, and microorganisms; can be carcinogenic has high solubility in an aqueous environment. This research aims to study electrochemical removal hexavalent electrocoagulation using iron aluminum electrodes monopolar configuration, evaluating effect residence time, voltage, number on efficiency.
 Methodology: experiments were conducted 3L batch cell, 10 6 stainless steel plates as electrodes, connected at distance 1.5 cm configuration parallel power source. Contaminated solution Cr was treated concentration 50 mg/L, two levels time (20 30 min), voltage V), (6 electrodes).
 Results: After tests, obtained percentages between 60.15 92.9%. most significant positive variable process increase time. It inferred that performs better lower voltages longer times joint contact would performance process, achieving greater removal.
 Conclusions: reduction potential used cost-effective heavy metals from

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Agricultural Waste as Adsorbent for Removal of Chromium (VI) from Aqueous Solution

Background & Aims of the Study: Since the chromium (VI) is a toxic, carcinogenic and non-biodegradable element and can accumulate in the tissues, the presence and release of this element through the effluents is associated with dangerous effects on life cycle. Thus, it should be removed from the effluents. In the present study, biosorption of Cr(VI) from aqueous solutio...

متن کامل

Use of Sawdust of Aspen Tree for the Removal of Chromium (VI) from Aqueous Solution

Adsorption capacity of Cr (VI) onto sawdust of aspen tree and activated sawdust, was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH , temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and caused to be maximum at pH 2.0. The amounts of Cr(VI) adsorbed increased with increas...

متن کامل

Removal of chromium (VI) from aqueous solution by adsorption using cousinia eryngioides boiss and activated carbon

Adsorption capacity of Cr (VI) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH, temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and found to be maximum at pH 2.0. The amounts of Cr (VI) adsorbed increased with increase...

متن کامل

Application of Electrocoagulation Process for Reactive Red 198 Dye Removal from the Aqueous Solution

Abstract Background and purpose:The main objectives of this research were to evaluating the application of electrocoagulation process for 198 dye from the aqueous phase and determining the optimum operating conditions to the dye removal using aluminum and iron electrodes. Materials and Methods:The present study was conducted in bench-scale. The spectrophotometer DR 5000 was used to determine th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Tecnura

سال: 2021

ISSN: ['0123-921X', '2248-7638']

DOI: https://doi.org/10.14483/22487638.17088