Electrochromism of amorphous ruthenium oxide thin films
نویسندگان
چکیده
منابع مشابه
Differences between amorphous indium oxide thin films
inese Materials Res 16/j.pnsc.2013.08.00 : Department of Ma ity 2220 Campus SA Tel.: þ1 847 49 chang@northwester esponsibility of Chin Abstract A series of 60 nm thick indium oxide thin-films, all amorphous as determined by x-ray diffraction, were found to have physical and electrical properties that depended on the temperature of deposition. The carrier mobility and film conductivity decreased...
متن کاملNitrogen doping of amorphous carbon thin films
Nitrogenated and hydrogenated amorphous carbon (a-C:H:N) films have been deposited by a plasma beam source using a gas mixture of C2H2 , Ar and N2 . The Ar/C2H2 ratio is kept constant at a ratio of 3, with the nitrogen flow allowed to vary. Nonnitrogenated films, with Ar/C2H2 ratios of 3 and 6 were also deposited and analyzed before attempting to identify the modifications to the microstructura...
متن کاملPhotoinduced doping of thin amorphous WO, films
During cxposurc of thin amorphous WO, films to UV light, both the optical absorptivity and thc electrical conductibity increase, Using optically excited surface plasmons. we were ablc to mcnsure even subtle changes of the absorpt~vity of 10 ntn thtck films simuFtaneously with their electrical resistivity a t varivus temperatuscs. Our measurements show that the temperature dependence and thc dcp...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solid State Ionics
سال: 2003
ISSN: 0167-2738
DOI: 10.1016/j.ssi.2003.08.035