Electrochemical Studies of the Corrosion Behavior of Al/SiC/PKSA Hybrid Composites in 3.5% NaCl Solution
نویسندگان
چکیده
The corrosion behavior of metal matrix composites (MMCs) is accelerated by the inclusion reinforcements. Hence, this study investigates MMCs produced from Al 6063 alloy with reinforcement particulates silicon carbide (SiC) and palm kernel shell ash (PKSA) at different mix ratios. were synthesized using double stir casting technique. behaviors in NaCl solutions studied via gravimetric analysis electrochemical measurements. showed fluctuating dissolution rate samples solution to indicate flawed film as well product formation over surface specimens. observed mechanism was general pitting corrosion. presence reinforcements within Al6063 acted active sites for initiation. range values Ecorr Icorr obtained 3.5% 24 h between −220.62 −899.46 mV 5.45 40.87 µA/cm2, respectively, while 72 h, ranged 255.88 −887.28 mV, 7.19 16.85 µA/cm2. Nyquist Bode plots revealed under investigation, predominant reactions on linked charge transfer processes. relative resistance depends thin oxide formed samples.
منابع مشابه
an inverstigation into the shrinkage behavior (kinetics) of microfilled hybrid and nano dental composites
چکیده ندارد.
15 صفحه اولThe Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملElectrochemical study on the corrosion behavior of Ti3SiC2 in 3.5 NaCl solution
As a newly developed conductive ceramic with wide application prospects, the electrochemical corrosion behavior of Ti3SiC2 in 3.5% NaCl solution was investigated by potentiodynamic polarization, potentiostatic polarization and electrochemical impedance spectroscopy. Commercially pure titanium (CP Ti) was selected for comparative, and cooperated with XRD, XPS, SEM, the passivation behavior, corr...
متن کاملElectrochemical Behavior of Al-B4C Metal Matrix Composites in NaCl Solution
Aluminum based metal matrix composites (MMCs) have received considerable attention in the automotive, aerospace and nuclear industries. One of the main challenges using Al-based MMCs is the influence of the reinforcement particles on the corrosion resistance. In the present study, the corrosion behavior of Al-B₄C MMCs in a 3.5 wt.% NaCl solution were investigated using potentiodynamic polarizat...
متن کاملElectrochemical assessment of imidazole derivatives as corrosion inhibitors for mild steel in 3.5 NaCl solution
The corrosion inhibition efficiency of benzimidazole, 2-methylbenzimidazole and 2- aminobenzimidazole for mild steel immersed in 3.5 NaCl solution was investigated by electrochemical impedance spectroscopy EIS at concentration range from 10-5 to 10-2 M of imidazoles and temperature range from 30 to 50°C. In addition, DC polarization was examined to determine inhibition mechanism at concentratio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of composites science
سال: 2022
ISSN: ['2504-477X']
DOI: https://doi.org/10.3390/jcs6100286