Electrochemical Seismic Design and Artificial Intelligence System Modeling of High-Rise Steel Structure Buildings
نویسندگان
چکیده
This study aims to improve the mechanical earthquake-resistance ability of high-rise buildings’ steel structures so that their safety performance is improved and service life prolonged. The simulation experiments on response staggered truss structure are conducted in buildings earthquake energy waves. First, MATLAB used build an experimental platform for evaluation residential buildings. Through building model training, it found meets needs study. Second, parameters, deformation recovery capacity, dynamic speed simulated tested. After waves with different intensities posed model, parameters tested, changes analyzed. Finally, post-earthquake tested through comparative analysis. results show interlayer displacement fluctuation smallest, resistance better than others under all kinds earthquakes. Although its decreases duration earthquakes, reduction slow. When quake lasts 12 s, still greater 2500 MPa. provides a reference
منابع مشابه
Evaluation of Seismic Performance of Combined Horizontal and Vertical Hexagrid Structural System for High-rise Buildings
Summary In this study, the seismic performance of hexagrid structures which are composed of horizontal and vertical hexagrid by using a transitional story, has been investigated. To this end, 10 models of 50-story hexagrid structures were designed. 9 models with horizontal hexagrid cells which transited to vertical cells using a transitional story, and a model of completely horizontal hexagrid ...
متن کاملA Macro-element Based Practical Model for Seismic Analysis of Steel-Concrete Composite High-Rise Buildings
Seismic behaviour of steel-concrete composite high-rise buildings, composed of external steel frames (SF) and internal concrete tube (CT), with rectangular plan is investigated in this paper. A macro-element based model is established for seismic analysis of composite high-rise buildings aiming at predicting their global responses under earthquakes. By employing this macro-element based model, ...
متن کاملCRITICAL INCIDENT ANGLE FOR THE MINIMUM COST DESIGN OF LOW, MID AND HIGH-RISE STEEL AND REINFORCED CONCRETE-COMPOSITE BUILDINGS
One of the main tasks of engineers is to design structural systems light and economic as possible, yet resistant enough to withstand all possible loads arising during their service life and to absorb the induced seismic energy in a controlled and predictable fashion. The traditional trial-and-error design approach is not capable to determine an economical design satisfying also the code require...
متن کاملA COMPARATIVE STUDY OF OPTIMUM AND IRANIAN SEISMIC DESIGN FORCE DISTRIBUTIONS FOR STEEL MOMENT RESISTING BUILDINGS
In this study, constant-ductility optimization algorithm under a family of earthquake ground motions is utilized to achieve uniform damage distribution over the height of steel moment resisting frames (SMRFs). SMRF structures with stiffness-degrading hysteric behavior are modeled as single-bay generic frame in which the plastic hinge is confined only at the beam ends and the bottom of the first...
متن کاملDesign of high-rise buildings: past, present and future
An overview of development of high-rise buildings is presented. Key advancements leading to highrise buildings of today are discussed. Structural analysis and design considerations for modern highrise buildings are presented and trends in design of tall buildings of the future are discussed.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Chemistry
سال: 2022
ISSN: ['2090-9063', '2090-9071']
DOI: https://doi.org/10.1155/2022/8693110