Electrochemical Response of AA7075-T651 Following Immersion in NaCl Solution
نویسندگان
چکیده
منابع مشابه
The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملElectrochemical Behavior of Nanocrystalline Fe88Si12 Alloy in 3.5% NaCl Solution
Influence of microstructure on electrochemical behavior of nanocrystalline Fe88Si12 alloy has been investigated in 3.5 wt% NaCl solution. The results show that Fe88Si12 alloy with optimal corrosion resistance is composite of ordered Fe3Si and disordered Fe(Si) phases and grain size of 40 nm. Because the ordered Fe3Si structure is beneficial to form SiO2 film, which possesses good corrosion resi...
متن کاملThree Dimensional Microstructures: Statistical Analysis of Second Phase Particles in AA7075-T651
1. Abstract. This paper describes some aspects of reconstruction of microstructures in three dimensions. A distinction is drawn between tomographic approaches that seek to characterize specific volumes of material, either with or without diffraction, and statistical approaches that focus on particular aspects of microstructure. A specific example of the application of the statistical approach i...
متن کاملElectrochemical assessment of imidazole derivatives as corrosion inhibitors for mild steel in 3.5 NaCl solution
The corrosion inhibition efficiency of benzimidazole, 2-methylbenzimidazole and 2- aminobenzimidazole for mild steel immersed in 3.5 NaCl solution was investigated by electrochemical impedance spectroscopy EIS at concentration range from 10-5 to 10-2 M of imidazoles and temperature range from 30 to 50°C. In addition, DC polarization was examined to determine inhibition mechanism at concentratio...
متن کاملSurface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651
The surface finish was extensively studied in usual machining processes (turning, milling, and drilling). For these processes, the surface finish is strongly influenced by the cutting feed and the tool nose radius. However, a basic understanding of tool/surface finish interaction and residual stress generation has been lacking. This paper aims to investigate the surface finish and residual stre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Transactions
سال: 2019
ISSN: 1938-6737
DOI: 10.1149/1.2215495