Electrochemical Reactive Separation: Asymmetric Redox‐Polymer Interfaces for Electrochemical Reactive Separations: Synergistic Capture and Conversion of Arsenic (Adv. Mater. 6/2020)
نویسندگان
چکیده
منابع مشابه
CO2 capture and electrochemical conversion using superbasic [P66614][124Triz].
The ionic liquid trihexyltetradecylphosphonium 1,2,4-triazolide, [P66614][124Triz], has been shown to chemisorb CO2 through equimolar binding of the carbon dioxide with the 1,2,4-triazolide anion. This leads to a possible new, low energy pathway for the electrochemical reduction of carbon dioxide to formate and syngas at low overpotentials, utilizing this reactive ionic liquid media. Herein, an...
متن کاملElectrochemical Degradation of Reactive Blue 19 Dye in Textile Wastewater
Textile wastewater is notoriously known to contain strong colour, a highly fluctuating pH and significant COD (Chemical Oxygen Demand) values. Because of these characteristics, treatment of these effluents has been rather difficult. Traditional methods for dealing with textile wastewater consist of various combinations of biological, physical and chemical methods. Because of the large variabili...
متن کاملMixed-Metal Semiconductor Anodes for Electrochemical Water Splitting and Reactive Chlorine Species Generation: Implications for Electrochemical Wastewater Treatment
A procedure for the preparation of semiconductor anodes using mixed-metal oxides bound together and protected with a TiO2 nanoglue has been developed and tested in terms of the relative efficiencies of the oxygen evolution (OER), the reactive chlorine species evolution (RCS), and the hydrogen evolution (HER) reactions. The composition of the first anode is a Ti metal substrate coated with IrTaO...
متن کاملFuel cells for electrochemical energy conversion
A fuel cell is essentially a compact electrochemical “factory” that takes fuel as input and produces electricity as output (see fig. 1). Like a factory, a fuel cell will continue to churn out product (electricity) as long as raw material (fuel) is supplied. This is the key difference between a fuel cell and a battery. While both rely on electrochemistry to work their magic, a fuel cell is not c...
متن کاملCdSe Photoanodes for Electrochemical Photovoltaic Conversion
Recently cadmium selenide (CdSe) photoelectrodes attract ed interest concerning solar energy conversion because of their good stability and high efficiency. Investigations were per formed with CdSe single crystals [1, 2], sintered pellets [3], pastes [4, 5] as well as thin films, obtained by different meth ods, e.g. electrochemical deposition [6-8], spray pyrolysis [9], vacuum deposition [10...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials
سال: 2020
ISSN: 0935-9648,1521-4095
DOI: 10.1002/adma.202070040