Electrochemical Properties of Low Bi Doped La0.60Dy0.10Sr0.30Mn(1-x)BixO3 Perovskite Magneticaloric Materials
نویسندگان
چکیده
Developing low-cost, high-durability and high-performance electrocatalytic materials are needed for hydrogen/oxygen evolution (HER/OER) oxygen reduction reactions (ORR) which crucial steps regenerative fuel cells. Although Pt-based, RuO2 IrO2 widely used these purposes, other alternative required with desired properties. In this regard, we studied the electrochemical properties of lanthanum-based perovskites were synthesized by sol-gel method. We investigated addition 10% Dy 30% Sr into A site a small amount Bi (x: 0, 0.03 0.1) added B La0.60Dy0.10Sr0.30Mn(1-x)BixO3 on HER, OER ORR in 1 M KOH alkaline media at room temperature. While 0% 3% exhibited poor HER activities, effect structure enhanced activities lowering onset potential from -1.389 V to -1.036 (vs. Ag/AgCl) increasing specific current density -1.4 -13.3 mA cm-2 -121.8 cm-2. Similarly, activity was also improved due found be 0.758 88.3 cm-2, respectively. The large Tafel slopes indicate that mechanism is possible but slow rate. resulted very high resistance 19.3 kΩ it reduced value 3.5 ion conducting paths developed catalysts.
منابع مشابه
Sol-Gel Synthesis, Characterization and Optical Properties of Bi 3+ - Doped CdO Sub-Micron Size Materials
Highly crystalline Bi3+-doped cadmium oxide (CdO) sub-micron structures were synthesized by calcination the obtained precursor from a sol-gel reaction. The reaction was carried out with cadmium nitrate (Cd(NO3)2.4H2O), bismuth nitrate (Bi(NO3)3.5H2O) and ethylene glycol (C2H6O2) reactan...
متن کاملsol-gel synthesis, characterization and optical properties of bi 3+ - doped cdo sub-micron size materials
highly crystalline bi3+-doped cadmium oxide (cdo) sub-micron structures were synthesized by calcination the obtained precursor from a sol-gel reaction. the reaction was carried out with cadmium nitrate (cd(no3)2.4h2o), bismuth nitrate (bi(no3)3.5h2o) and ethylene glycol (c2h6o2) reactants without any additives at 80°c for 2h. resulting gel was calcined at 900 °c with increasing temperature rate...
متن کاملSynthesis and electrochemical performance of doped LiCoO2 materials
Synthesis and electrochemical performance of doped LiCoO2 materials S.A. Needham a,∗, G.X. Wang a,b, H.K. Liu a,b, V.A. Drozd c, R.S. Liu c a Institute for Superconducting & Electronic Materials, University of Wollongong, Northfields Avenue, Gwynneville, NSW 2522, Australia b Australian Research Council Centre of Excellence for Nanostructured Electromaterials, University of Wollongong, Australi...
متن کاملElectrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery
Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...
متن کاملStructure and properties of complex hydride perovskite materials.
Perovskite materials host an incredible variety of functionalities. Although the lightest element, hydrogen, is rarely encountered in oxide perovskite lattices, it was recently observed as the hydride anion H(-), substituting for the oxide anion in BaTiO3. Here we present a series of 30 new complex hydride perovskite-type materials, based on the non-spherical tetrahydroborate anion BH4(-) and n...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ad?yaman üniversitesi fen bilimleri dergisi
سال: 2022
ISSN: ['2146-586X', '2147-1630']
DOI: https://doi.org/10.37094/adyujsci.1210860