Electrochemical Impedance Spectroscopy of Ni-B Coatings and Optimization by Taguchi Method and Grey Relational Analysis
نویسندگان
چکیده
منابع مشابه
Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method
In this paper, the authors present an experimental study of roughness characteristics of electroless Ni-B coatings and optimization of the coating process parameters based on L27 Taguchi orthogonal design. Three coating process parameters are considered viz. bath temperature, reducing agent concentration, and nickel source concentration. It is observed that concentration of reducing agent toget...
متن کاملOptimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملOptimization of 6061T6 CNC Boring Process Using the Taguchi Method and Grey Relational Analysis
This study investigated the optimization of computer numerical control (CNC) boring operation parameters for aluminum alloy 6061T6 using the grey relational analysis (GRA) method. Nine experimental runs based on an orthogonal array of Taguchi method were performed. The surface properties of roughness average and roughness maximum as well as the roundness were selected as the quality targets. An...
متن کاملParametric Optimization of Wedm Using Grey Relational Analysis with Taguchi Method
Wire EDM is one of the latest advanced micro-machining techniques, where a thin wire (Ǿ= 0.25 mm) of tool electrode is fed on the work piece which gradually shears off the material during the machining process. This micro-machining process may help overcome the limitations and restriction faced during conventional mechanical machining process. This paper is based on wire-EDM machining of a part...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Portugaliae Electrochimica Acta
سال: 2011
ISSN: 1647-1571
DOI: 10.4152/pea.201104211