Electrochemical Characteristics of a Biomedical Ti70Zr20Nb7.5Ta2.5 Refractory High Entropy Alloy in an Artificial Saliva Solution
نویسندگان
چکیده
High entropy alloys are a new type of multi-component material with improved mechanical properties that could be useful in medical implants. The corrosion behavior biomedical Ti70Zr20Nb7.5Ta2.5 alloy was examined and matched commercial Ti the traditional biomaterial Ti6Al4V artificial saliva. Moreover, impact different pH concentrations fluoride ions on also investigated. Ecorr decreases following order: > Ti. steady-state potential OCP indicates resistance same immersed saliva at low (pH 2.0) high ion concentration (2000 ppm) suffers from cracking exhibits lowest to compared sample without (0–1000 values (5.0 7.0). These data reveal if enhanced or falls, reduces. EIS show passive layer is made up duplex outer inner oxide alloy's fluoride-containing solutions has been significantly reduced. Additionally, demonstrate rises increasing immersion time ions. According X-ray photoelectron spectroscopy investigation, protective oxides include TiO2, ZrO2, Nb2O5, Ta2O5. can considered as promising suitable for usage among all materials tested this work.
منابع مشابه
Supporting data for senary refractory high-entropy alloy CrxMoNbTaVW
This data article is related to the research paper entitled "senary refractory high-entropy alloy Cr x MoNbTaVW [1]". In this data article, the pseudo-binary Cr-MoNbTaVW phase diagram is presented to show the impact of Cr content to the senary Cr-MoNbTaVW alloy system; the sub-lattice site fractions are presented to show the disordered property of the Cr-MoNbTaVW BCC structures; the equilibrium...
متن کاملCorrosion behavior of Ti-5Ag alloy with and without thermal oxidation in artificial saliva solution.
OBJECTIVES The aim of the present study was to investigate the effect of thermal oxidation on the corrosion behavior of Ti-5Ag alloy. METHODS The microstructure of Ti-5Ag alloy without and with thermal oxidization treatment were characterized, with commercial pure (CP) Ti as control, by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (...
متن کاملInfluence of artificial saliva compositions on tribological characteristics of Ti-6Al-4V implant alloy.
The present paper describes the results of tests on the influence of human saliva and its substitutes on tribological characteristics of implant materials on the example of the Ti-6Al-4V (a-Ti) titanium alloy. The saliva substitutes were prepared on the basis of pyrophosphates and mucins dissolved in saline buffer. The results of the presented tribological tests show that the values of the para...
متن کاملPolymorphism in a high-entropy alloy
Polymorphism, which describes the occurrence of different lattice structures in a crystalline material, is a critical phenomenon in materials science and condensed matter physics. Recently, configuration disorder was compositionally engineered into single lattices, leading to the discovery of high-entropy alloys and high-entropy oxides. For these novel entropy-stabilized forms of crystalline ma...
متن کاملHybrid Monte Carlo/Molecular Dynamics Simulation of a Refractory Metal High Entropy Alloy
The high entropy alloy containing refractory metals Mo-Nb-Ta-W has a body centered cubic structure, which is not surprising given the complete mutual solubility in BCC solid solutions of all pairs of the constituent elements. However, first principles total energy calculations for the binaries reveal a set of distinct energy minimizing structures implying the likelihood of chemically ordered lo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Bio- and Tribo-Corrosion
سال: 2022
ISSN: ['2198-4239', '2198-4220']
DOI: https://doi.org/10.1007/s40735-022-00726-5