Electrochemical Behavior of Electrodeposited Zinc-Iron Alloys in Alkaline Solutions
نویسندگان
چکیده
منابع مشابه
Electrochemical Deposition of γ-Phase Zinc-Nickel Alloys from Alkaline Solution
Zinc-nickel alloys with 8-15% nickel were deposited onto stainless steel for corrosion protection. Alkaline deposition conditions were utilized given that alkaline systems have been found to offer superior substrate coverage which results in better corrosion protection of the metal substrate (stainless steel) compared to acid bath depositions. This method utilizes ammonium hydroxide as the base...
متن کاملElectrodeposited Iron Group Thin-Film Alloys Structure-Property Relationships
Various iron group alloys have been electrodeposited and evaluated for properties including corrosion resistance, microstructure, electrical resistivity, magnetoresistance and other magnetic properties. Corrosion resistance depends on deposit composition and microstructure, which are controlled by solution composition and deposition variables. Maximum corrosion resistance was observed for 50Ni5...
متن کاملThe Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملThe Electrochemical Behavior of AISI 321 Stainless Steel in Alkaline Media
In this paper, the electrochemical behaviour of passive films formed on AISI 321 stainless steel (AISI 321) immersed in 0.1 M NaOH + 0.1 M KOH solution was evaluated by different electrochemical techniques. For this purpose, passive films were formed at open circuit potential for 1 to 12 hours and then electrochemical measurements were done. The polarization curves suggested that AISI 321 showe...
متن کاملElectrochemical Behavior of Alloys for Fixed Partial Denture
The electrochemical behaviors of eight parent alloys and four post-solder alloys used in dental prostheses were specified in a (pH=7.4; [NaCl]=9g/L)-aqueous solution at 37°C. For each alloy, the free potential was followed during two hours, and a cyclic polarization between the cathodic domain and the solvent’s oxidation was performed. The galvanic corrosion between each parent alloy and its us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1991
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.77.2_251