Electrochemical behavior of Ag-Cu alloy in alkaline media
نویسندگان
چکیده
منابع مشابه
The Electrochemical Behavior of AISI 321 Stainless Steel in Alkaline Media
In this paper, the electrochemical behaviour of passive films formed on AISI 321 stainless steel (AISI 321) immersed in 0.1 M NaOH + 0.1 M KOH solution was evaluated by different electrochemical techniques. For this purpose, passive films were formed at open circuit potential for 1 to 12 hours and then electrochemical measurements were done. The polarization curves suggested that AISI 321 showe...
متن کاملthe electrochemical behavior of aisi 321 stainless steel in alkaline media
in this paper, the electrochemical behaviour of passive films formed on aisi 321 stainless steel (aisi 321)immersed in 0.1 m naoh + 0.1 m koh solution was evaluated by different electrochemical techniques. forthis purpose, passive films were formed at open circuit potential for 1 to 12 hours and then electrochemicalmeasurements were done. the polarization curves suggested that aisi 321 showed e...
متن کاملElectrochemical Synthesis of 5-Aminosalicylic Acid from 5- Nitrosalicylic Acid in Alkaline Media
5-Aminosalicylic acid (5-ASA) is currently prepared by electrochemical reduction of 5-nitrosalicylic acid (5-NSA) in acidic media. In this work, electrolytic reduction of 5-NSA in alkaline media is presented. Reactionconditions and parameters such as anode and cathode electrodes, electrolyte type, reaction time, temperature,current, and the pH for isolation of product are investigated. The yiel...
متن کاملElectrochemical Behavior of Nanocrystalline Fe88Si12 Alloy in 3.5% NaCl Solution
Influence of microstructure on electrochemical behavior of nanocrystalline Fe88Si12 alloy has been investigated in 3.5 wt% NaCl solution. The results show that Fe88Si12 alloy with optimal corrosion resistance is composite of ordered Fe3Si and disordered Fe(Si) phases and grain size of 40 nm. Because the ordered Fe3Si structure is beneficial to form SiO2 film, which possesses good corrosion resi...
متن کاملPhase Transformation Induced Self-Healing Behavior of Al-Ag Alloy
Self-healing alloys are promising materials that can decrease the consequences of accidents. To detect crack formation in a material is simple task that can be performed by e.g., sonic or ultrasound detection, but it is not always possible to immediately replace the damaged parts. In this situation, it is very advantageous to have the chance to heal the crack during operation, which can be done...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hemijska industrija
سال: 2010
ISSN: 0367-598X
DOI: 10.2298/hemind1000005g