Electroactive Polymer Materials for Rechargeable Lithium Battery Cathode.
نویسندگان
چکیده
منابع مشابه
Rechargeable quasi-solid state lithium battery with organic crystalline cathode
Utilization of metal-free low-cost high-capacity organic cathodes for lithium batteries has been a long-standing goal, but critical cyclability problems owing to dissolution of active materials into the electrolyte have been an inevitable obstacle. For practical utilisation of numerous cathode-active compounds proposed over the past decades, a novel battery construction strategy is required. We...
متن کاملNMR studies of cathode materials for lithium-ion rechargeable batteries.
Lithium intercalation or insertion materials have been widely investigated in the search for new electrode materials for use in high-voltage rechargeable batteries.1-6 The first commercial Li-ion rechargeable battery contains the layered materials LiCoO2 (Figure 1) and graphite as the cathode (or positive electrode) and anode (or negative electrode), respectively.7 Although this battery is the ...
متن کاملMicroporous gel polymer electrolytes for lithium rechargeable battery application
Microporous poly(vinylidene fluoride)/poly(methyl methacrylate) (PVDF/PMMA) membranes were prepared using the phase-separation method. Then, the membranes were immersed in liquid electrolyte to form polymer electrolytes. The effects of PMMA on the morphology, degree of crystallinity, porosity, and electrolyte uptake of the PVDF membrane were studied. The addition of PMMA increased the pore size...
متن کاملElectrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery
Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...
متن کاملSynthesis of Nanoscale Lithium-Ion Battery Cathode Materials Using a Porous Polymer Precursor Method
Fine particles of metal oxides with carefully controlled compositions can be easily prepared by the thermal decomposition of porous polymers, such as cellulose, into which solutions containing salts of the desired cations have been dissolved. This is a simple and versatile method that can be used to produce a wide variety of materials with a range of particle sizes and carefully controlled chem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi
سال: 1995
ISSN: 0454-1138,2185-9825
DOI: 10.1295/kobunshi.44.64