ELECTRO SPARK DEPOSITION OF TiB2 LAYERS ON Ti6Al4V ALLOY
نویسندگان
چکیده
منابع مشابه
Effect of Deposition Regime on Tribological Behavior of VK8Coating on 1.2344 Tool Steel Obtained by Electro Spark Method
In this study, the effect of deposition regime on the wear behavior of VK8 coating applied to 1.2344 tool steel by electro spark method (ESA) was investigated. After sample preparation, the coating with high and low regime was applied. To assess the wear behavior, the pin on disk test method according to ASTM G99-04, was used. For surveying surface morphology and cross section of the coating as...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملOsteoblast Cell Response on the Ti6Al4V Alloy Heat-Treated
In an effort to examine the effect of the microstructural changes of the Ti6Al4V alloy, two heat treatments were carried out below (Ti6Al4V800) and above (Ti6Al4V1050) its β-phase transformation temperature. After each treatment, globular and lamellar microstructures were obtained. Saos-2 pre-osteoblast human osteosarcoma cells were seeded onto Ti6Al4V alloy disks and immersed in cell culture f...
متن کاملInfluence of Material Microstructures in Micromilling of Ti6Al4V Alloy
In the most recent decades the introduction of unconventional machining processes allowed the development of micromachining techniques. In this work, the influence of material microstructures on the micromilling process was investigated. Ti6Al4V alloy was selected as workpiece material since it is a very common material for micro applications and because its duplex microstructure can be easily ...
متن کاملA Comparative Study of Aluminium Alloy and Titanium Alloy Comparison of AL-7175 alloy and Ti6Al4V alloy (Literature Survey Paper)
About 50% of metals used in Aerospace industries are Aluminium and Titanium alloys, Alloys such as Ti6Al4V, AL-7175, and AL7075 are used extensively in space vehicles, aviation, and automotive industries for having enhanced mechanical properties like High strength to weight ratio, low Thermal Expansion and better Corrosion resistance. Comparison of properties Aluminium and Titanium alloys shows...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2016
ISSN: 1338-1156,1335-1532
DOI: 10.12776/ams.v22i1.628