Electrically Addressable Hybrid Architectures of Zinc Oxide Nanowires Grown on Aligned Carbon Nanotubes
نویسندگان
چکیده
منابع مشابه
Solution-grown zinc oxide nanowires.
We review two strategies for growing ZnO nanowires from zinc salts in aqueous and organic solvents. Wire arrays with diameters in the nanoscale regime can be grown in an aqueous solution of zinc nitrate and hexamethylenetetramine. With the addition of poly(ethylenimine), the lengths of the wires have been increased to 25 mum with aspect ratios over 125. Additionally, these arrays were made vert...
متن کاملVarying Phases of Alumina Nanowires Templated by Vertically Aligned Carbon Nanotubes Grown via Atomic Layer Deposition
Typically, alumina nanowires (NWs) are synthesized via physical evaporation, templated anodized aluminum oxide (AAO), or the vapor-liquid-solid (VLS) process [1,2,3]. All of these techniques have been shown to demonstrate successful growth of alumina NWs; however, in the cases where a facile method resulting in vertically aligned NWs is desired, many of these methods are difficult to integrate ...
متن کاملProtein Biosensors Based on Polymer Nanowires, Carbon Nanotubes and Zinc Oxide Nanorods
The development of biosensors using electrochemical methods is a promising application in the field of biotechnology. High sensitivity sensors for the bio-detection of proteins have been developed using several kinds of nanomaterials. The performance of the sensors depends on the type of nanostructures with which the biomaterials interact. One dimensional (1-D) structures such as nanowires, nan...
متن کاملFabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ
A hybrid composite architecture of carbon nanotubes (CNTs), advanced fibers and a matrix is described, from CNT synthesis and characterization through to standard mechanical and electrical laminate tests. Direct growth of aligned CNTs on the surface of advanced fibers in a woven fabric enables enhancement in multifunctional laminate performance, as demonstrated by a 69% increase in interlaminar...
متن کاملDirect laser writing of 3D architectures of aligned carbon nanotubes.
Direct laser writing through two-photon polymerization lithography is used to fabricate 3D nanostructures containing aligned single-wall carbon nanotubes (SWCNTs). SWCNTs are aligned in the laser scanning directions while they are embedded in the structure. The alignment is induced by spatial confinement, volume shrinkage, and the optical gradient force. This method is expected to lead to new a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Functional Materials
سال: 2010
ISSN: 1616-301X
DOI: 10.1002/adfm.201000249