Electrical, Optical and Structural Analysis Depending on Concentration of TiO Thin Films Produced via Dip-Coating Method

نویسندگان

چکیده

Bu çalışmada, farklı derişimlerde (A1: 0,8 Molar, A2: 1,25x10-2 A3: 2,5x10-3 Molar) hazırlanan çözeltilere 2 şer kez 5 saniye daldırma metodu (Dip-coating) ile cam lameller üzerine TiO ince filmleri üretilmiştir ve üretilen bu filmler 500 °C’ de tavlanmıştır. Genel olarak amorf yapıya sahip filmlerin 2θ = 25,5° (1 0 1) Miller yönelim pikinde yayılma görülmüştür. Derişimin azalması küçük taneli yapılar, küresel şekilden daha irili ufaklı elipse doğru değişim göstermiştir. UV bölgede yansıtma özelliği oldukça fazla iken 400-700 nm görünür ise geçirgenlikleri fazladır. A1, A2 A3 derişimli enerji bant aralığı değerleri sırası Eg 3,52 eV; 2,60 eV 3,03 hesaplanmıştır. artması elektriksel özdirenç değerlerinin artması, oksit alt tabakalardaki özel iletkenlikten dolayı metal benzeri tipik bir davranış gösterdiğinin kanıtıdır.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

Structural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films

Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...

متن کامل

The effect of sputtering RF power on structural, optical and electrical properties of CuO and CuO2 thin films

In this paper, the RF power change effect on the structural, optical and electrical properties of CuO thin films prepared by RF reactive magnetron sputtering deposited on glass substrates are studied. At first, the thin films are prepared at 150, 280, 310 and 340W respectively. Then, the films are characterized by XRD, AFM, Uv-visible and four-point probe analysis respectively. The results show...

متن کامل

Structural, Optical and Electrical Properties of SilverNanoparticlesDeposited by Spin Coating Method

In this study, silver nanoparticles were synthesized by chemical reduction method at different concentrations of Ag colloid in the range of 500-16000 ppm. Nanoparticles were deposited by spin coating method on pre-etched glass and Si substrates. Structural, optical and electrical properties of the samples were studied using Scanning Electron Microscopy equipped with EDAX, UV-Vis spectroph...

متن کامل

structural, electrical and optical properties of molybdenum oxide thin films prepared by post-annealing of mo thin films

molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using dc magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°c) with flow oxygen at 200 sccm (standard cubic centimeter per minute). the crystallographic structure of the films was obtained by means of x-ray diffraction (xrd) analysis. an atomic force micr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Uluslararas? mühendislik ara?t?rma ve geli?tirme dergisi

سال: 2022

ISSN: ['1308-5506', '1308-5514']

DOI: https://doi.org/10.29137/umagd.1070390