Electrical discharge coating of NiTi alloy in deionized water
نویسندگان
چکیده
منابع مشابه
A Model of Micro Electro-Discharge Machining Plasma Discharge in Deionized Water
For successful commercial adaptation of the l-EDM (micro electro-discharge machining) process, there is a need to increase the process efficiency by understanding the process mechanism. This paper presents a model of the plasma discharge phase of a single discharge l-EDM event in deionized water. The plasma discharge is modeled using global model approach in which the plasma is assumed to be sp...
متن کاملBiocompatibility of NiTi Alloy Implants in vivo
In this study, the powders of Ni and Ti with 50.5 at.% Ni for 12 h were blended and cold pressed at the different pressures (50, 75 and100 MPa).The porous product obtained after Ni-Ti compacts were synthesized by SHS (self-propagating hightemperature synthesis) in the different preheating temperatures (200, 250 and 300oC) and heating rates (30, 60 and 90oC/min). The effects of the pressure, pre...
متن کاملFuzzy Modeling for Electrical Discharge Machining of Aluminum Alloy
Electrical discharge machining (EDM) is widely used process in the production of mould / dies, aerospace, automobile and electronics industries where intricate complex shapes need to be machined in very hard materials. The selection of the AISI 64430 was made taking into account its wide range of applications in the industrial field: defense, pharmaceutical, aerospace, shipbuilding industries e...
متن کاملAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2021
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2020.11.1015