Electrical Conductivity of Spark Plasma Sintered W-Cu and Mo-Cu Composites for Electrical Contact Applications
نویسندگان
چکیده
منابع مشابه
Electrical conductivity of dense Al, Ti, Fe, Ni, Cu, Mo, Ta, and W plasmas.
We report measurements of electrical conductivity of eight metals in the plasma state at densities ranging from 0.002 to 0.5 times solid density, and with internal energy from 2 to 30 kJ/gm. Data are presented as functions of internal energy and specific volume. Conductivity is observed to fall as the plasma expands for fixed internal energy, and for all but tantalum and titanium shows a minimu...
متن کاملPhase assembly and electrical conductivity of spark plasma 4 sintered CeO 2 – ZrO 2 ceramics 5
10 Abstract CexZr1-xO2 (x = 0.10, 0.16 and 0.33) nano11 crystalline powders were obtained by a two-step synthesis 12 technique and sintered by spark plasma sintering (SPS). As 13 consequence of the reduction of Ce to Ce species by 14 carbon in the graphite environment in SPS, phase assem15 blies including tetragonal, monoclinic and pyrochlore 16 phases were generated in the ceramics during the ...
متن کاملOhmic Contact of Cu/Mo and Cu/Ti Thin Layers on Multi-Crystalline Silicon Substrates
Cu-Mo and Cu-Ti contact structures were fabricated on multi-crystalline silicon substrates to provide a low resistance ohmic contact. Deposition steps are done in an excellent vacuum chamber by means of electron beam evaporation and samples are then annealed for the realization of an efficient alloy layer. The effects of process parameters such as film thickness, annealing duration and temp...
متن کاملEXPERIMENTAL INVESTIGATIONS OF THE Cu-Mo AND Cu-Ti ELECTRO-SPARK COATINGS MODIFIED BY LASER BEAM
The paper is concerned with determining the influence of the laser treatment process on the properties of electro-spark deposited coatings. The properties were assessed by analyzing the coating microstructure, microhardness, residual stresses and corrosion resistance. The tests were conducted for Mo, Ti and Cu coatings (the anode) which were electro-spark deposited over the C45 steel substrate ...
متن کاملSpark Plasma Sintered Hydroxyapatite – Zirconia Composites: Structural and Mechanical Properties
Hydroxyapatite (Ca10(PO4)6(OH)2) (HAp) is a very attractive material for human tissue implantation, beacuse it makes up ~69% of the weight of bone [1]. Unfortunately HAp posses low mechanical properties (strength, fracture toughness), which is a barrier to its applications in load-bearing situations [2]. The mechanical properties of HAp composites, is based on the synthesis of composites and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Minerals and Materials Characterization and Engineering
سال: 2021
ISSN: 2327-4077,2327-4085
DOI: 10.4236/jmmce.2021.91004