Electrical characteristics of GaAs Schottky contacts fabricated by electron-beam deposition technique.
نویسندگان
چکیده
منابع مشابه
Temperature dependence of electrical characteristics of Pt/GaN Schottky diode fabricated by UHV e-beam evaporation
Temperature-dependent electrical characterization of Pt/n-GaN Schottky barrier diodes prepared by ultra high vacuum evaporation has been done. Analysis has been made to determine the origin of the anomalous temperature dependence of the Schottky barrier height, the ideality factor, and the Richardson constant calculated from the I-V-T characteristics. Variable-temperature Hall effect measuremen...
متن کاملTantalum silicide Schottky contacts to GaAs
Tantalum silicide (TaSix ) films with different Si to Ta ratios (x) as Schottky contacts to GaAs have been studied. The films were prepared by coevaporation. The metallurgical properties of the film and the stability of the silicide-GaAs interface were studied by x-ray diffraction, Auger electron spectroscopy, and Rutherford backscattering spectroscopy. The films were annealed at various temper...
متن کاملLarge flexibility of high aspect ratio carbon nanostructures fabricated by electron-beam-induced deposition.
The mechanical properties of free-standing electron beam deposited amorphous carbon structures have been studied using atomic force microscopy. The fabricated carbon blades are found to be extraordinarily flexible, capable of undergoing vertical deflection up to ∼ 75% of their total length without inelastic deformation. The elastic bending modulus of these structures was calculated to be 28 ± 1...
متن کاملThermally induced transformations of amorphous carbon nanostructures fabricated by electron beam induced deposition.
We studied the thermally induced phase transformations of electron-beam-induced deposited (EBID) amorphous carbon nanostructures by correlating the changes in its morphology with internal microstructure by using combined atomic force microscopy (AFM) and high resolution confocal Raman microscopy. These carbon deposits can be used to create heterogeneous junctions in electronic devices commonly ...
متن کاملLithium manganese oxide films fabricated by electron beam directed vapor deposition
Lithium manganese oxide thin films have been grown using a gas jet based, electron beam directed vapor deposition technique. The deposition rate could be controlled by the electron beam power as well as the gas jet density and speed. This enabled films to be grown at deposition rates up to 16 nm /s which is a significantly higher deposition rate than that reported for the growth of this materia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1989
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.32.552