ELECTRIC DEPOSITION OF TIN-LEAD ALLOY BY PULSE CURRENT
نویسندگان
چکیده
منابع مشابه
Tumour treatment by direct electric current: electrode material deposition
Direct current electrotherapy was demonstrated to be an effective and relatively inexpensive local treatment of murine solid subcutaneous tumours. The insufficient knowledge of the mechanisms involved hinders its more extensive use in clinical oncology. Attempts were made to establish the correlation between the effectiveness of electrotherapy and deposition of the electrode material in the tum...
متن کاملThe Impact of Reflowing A Pbfree Solder Alloy Using A Tin/Lead Solder Alloy Reflow Profile On Solder Joint Integrity
The electronics industry is undergoing a materials evolution due to the pending Restriction of Hazardous Substances (RoHS) European Directive. Printed wiring board laminate suppliers, component fabricators, and printed wiring assembly operations are engaged in a multitude of investigations to determine what leadfree (Pbfree) material choices best fit their needs. The size and complexity of Pbfr...
متن کاملGrain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions
Effects of different amounts of lead (Pb) and tin (Sn) on microstructure and tensile properties of the AZ91 alloy were studied. The results presented that the microstructure of AZ91 alloy is consisted the α-Mg phase and semi-continuous network of β-Mg17Al12 intermetallics. For the as-cast AZ91 alloy, the average grain siz and the β phase volume fraction were 96.2 µm and of 25.3%, respectively. ...
متن کاملCavity mediated strain localization and overall ductility in eutectic tin-lead alloy
A combined experimental and numerical study is undertaken to examine the effects of pre-machined holes on strain localization and overall ductility in eutectic tin-lead alloy. Thin-sheet specimens with equal-sized holes aligned in the tensile loading direction are used. The tensile tests were performed at room temperature with a nominal strain rate of 0.001 s . The specimen, containing one hole...
متن کاملSynthesis of Tin Nitride SnxNyNanowires by Chemical Vapour Deposition
Tin nitride (Sn(x)N(y)) nanowires have been grown for the first time by chemical vapour deposition on n-type Si(111) and in particular by nitridation of Sn containing NH(4)Cl at 450 degrees C under a steady flow of NH(3). The Sn(x)N(y) nanowires have an average diameter of 200 nm and lengths >/=5 mum and were grown on Si(111) coated with a few nm's of Au. Nitridation of Sn alone, under a flow o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY
سال: 2021
ISSN: 1990-5297
DOI: 10.35211/1990-5297-2021-4-251-86-89