Elastohydrodynamics of Roll-to-Roll UV-Cure Imprint Lithography
نویسندگان
چکیده
منابع مشابه
Using UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patterns
Conventional methods used to fabricate the light guide plates (LGPs), such as injection molding and hot embossing, are difficult and unsuitable. In this study, the authors propose a new manufacturing process for the roll-to-plate UV imprint lithography (RPIL) technique that fabricates LGPs with dot patterns. A flexible and transparent sheet mold with microstructures required by the RPIL machine...
متن کاملA review of roll-to-roll nanoimprint lithography
UNLABELLED Since its introduction in 1995, nanoimprint lithography has been demonstrated in many researches as a simple, low-cost, and high-throughput process for replicating micro- and nanoscale patterns. Due to its advantages, the nanoimprint lithography method has been rapidly developed over the years as a promising alternative to conventional nanolithography processes to fulfill the demands...
متن کاملHigh-Speed Roll-to-Roll Nanoimprint Lithography on Flexible Plastic Substrates**
The ability of microto nanometer-scale patterning on flexible substrates can enable many new applications in the area of photonics and organic electronics. A major roadblock has remained for many practical applications of patterned nanostructures, which is the throughput of nanopattern replication and the associated cost issues. Among the emerging techniques, nanoimprint lithography (NIL) clear...
متن کاملRoll-to-roll large-format slot die coating of photosensitive resin for UV embossing
Roll-to-roll large-format coating and UV embossing processes aim to revolutionise the manufacturing of functional films, with the ability to process a largearea at one time, resulting in high throughput and cost reduction. In this article, we present the experimental results obtained during the process development for roll-toroll large-format coating and UV embossing. We have investigated key a...
متن کاملSingle Layer Broadband Anti-Reflective Coatings for Plastic Substrates Produced by Full Wafer and Roll-to-Roll Step-and-Flash Nano-Imprint Lithography
Anti-reflective coatings (ARCs) are used to lower the reflection of light on the surface of a substrate. Here, we demonstrate that the two main drawbacks of moth eye-structured ARCs-i.e., the lack of suitable coating materials and a process for large area, high volume applications-can be largely eliminated, paving the way for cost-efficient and large-scale production of durable moth eye-structu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Industrial & Engineering Chemistry Research
سال: 2019
ISSN: 0888-5885,1520-5045
DOI: 10.1021/acs.iecr.9b03160