Elasto-Plastic FEM Stress Analysis and Mechanical Characteristics of Pipe Flange Connections with Non-Asbestos Gaskets under Internal Pressure
نویسندگان
چکیده
منابع مشابه
A Stress Analysis of Pipe Flange Connections
The use of pipe flange connections is standardized in the codes of JIS, ASME, DIN and so on. However, these codes are almost entirely dependent on experience, and subsequently some problems concerning pipe flange connections have been encountered. In the present paper, the distribution of contact stresses which governs the sealing performance is analyzed as a three-body contact problem, using a...
متن کاملelasto-plastic analysis of thick walled tanks subjected to internal pressure
in this article, the elasto-plastic analysis of thick walled fg tanks subjected to internal pressure is elaborated. today, thick walled tanks containing liquids with high pressure are used in the chemical industries. the high internal pressure causes part of the thickness of reservoir to yield; therefore, we need the elasto-plastic analysis. in this study, elasto-plastic behavior of fg cylindri...
متن کاملA 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...
متن کاملFailure pressure of straight pipe with wall-thinning under internal pressure
The failure pressure of pipe with wall-thinning was investigated by using three-dimensional elastic-plastic finite element analyses (FEA). With careful modeling of the pipe and flaw geometry in addition to a proper stress-strain relation of the material, FEA could estimate the precise burst pressure obtained by the tests. FEA was conducted by assuming three kinds of materials: line pipe steel, ...
متن کاملAnalytical Solution for Electro-mechanical Behavior of Piezoelectric Rotating Shaft Reinforced by BNNTs Under Non-axisymmetric Internal Pressure
In this study, two-dimensional electro-mechanical analysis of a composite rotating shaft subjected to non-axisymmetric internal pressure and applied voltage is investigated where hollow piezoelectric shaft reinforced by boron nitride nanotubes (BNNTs). Composite structure is modeled based on piezoelectric fiber reinforced composite (PFRC) theory and a representative volume element has been cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid Mechanics and Materials Engineering
سال: 2012
ISSN: 1880-9871
DOI: 10.1299/jmmp.6.288