Elasto-Plastic-Creep Characteristics of BAg8 Brazing Filler Metal Estimated by Tension-Strain Maintenance Test
نویسندگان
چکیده
منابع مشابه
Vacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
Both Zirconium-based alloys and 321stainless steel are widely used as engineering alloys due to their good mechanical properties. Conventional fusion welding techniques for Zr alloys and stainless steel are not feasible due to the formation of brittle intermetallic compounds such as (Zr3Fe, ZrFe2 and Zr2Fe) and corrosion cracking. Brazing is one of the most wide...
متن کاملSome Computational Issues in Large Strain Elasto-plastic Analysis
The stress integration procedure proposed by Eterovic and Bathe [Inr. J. numer. Merh. Engng 30, 1099-l 114 (1990).] is studied in detail. The elasto-plasticity formulation is based on the use of the total logarithmic strains and Cauchy stresses, and the Euler backward method of time integration. The accuracy of the procedure is assessed in the solution of various analysis problems and is compar...
متن کاملDetermination of Stress Strain State Components of Butt Welded Joint with Mild Interlayer Subjected to Elasto-Plastic Tension
Determination of stress strain state components of butt welded joint with a mild interlayer at elasto-plastic tension is presented in this paper. Function of normal transverse stresses distribution on the thickness of mild interlayer and equations for determination of the stress intensity maximum value in hard metal at elasto-plastic deforming are proposed. The longitudinal stresses of mild and...
متن کاملInvestigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal
Nowadays, cemented carbides-steels joints by brazing method are taken into consideration. One of the problems of these joints is the creation residual stresses that can reduce it with choose correct parameters of brazing. In this study, Silver base alloy filler containing copper, zinc and cadmium have been used in temperature 780°C and the effect of time parameter 5, 10 and 15 minutes on micros...
متن کاملWettability of Brazing Filler Metals on Copper and Copper Alloys
The possibility of alloying can not be avoided at the interface between molten brazing filler metal and base metal in brazing, so the wettability of brazing filler metal can not be easily explained theoretically. We used the original apparatus for wettability test and investigated the relation between the wettability of brazing filler metals of Ag-P-Cu and Ag-Cu-Zn-Cd systems on copper and the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2009
ISSN: 0288-4771
DOI: 10.2207/qjjws.27.96