Elasto-plastic analysis of subsurface layer under cyclic rolling-sliding contact loading.

Predicting Depth and Path of Subsurface Crack Propagation at Gear Tooth Flank under Cyclic Contact Loading

In this paper, a two-dimensional computational model is proposed for predicting the initiation position and propagation path of subsurface crack of spur gear tooth flank. In order to simulate the contact of teeth, an equivalent model of two contacting cylinders is used. The problem is assumed to be under linear elastic fracture mechanic conditions and finite element method is used for numerical...

An analysis of three-dimensional elasto-plastic sinusoidal contact

Researchers have developedmanymodels to simulate the elasto-plastic contact of spheres. However, there does not appear to exist a closed-form analytical model for elasto-plastic three-dimensional sinusoidal contact. This work uses a finite element model (FEM) to characterize elasto-plastic sinusoidal contact. Although at initial contact the sphere and sinusoidal case are very similar and can bo...

Numerical Analysis of Piles in Elasto-plastic Soils under Axial Loading

A finite element model has been developed to simulate nonlinear response of piles/drilled piers under axial loading. The nonlinear stress-strain behaviors of soils are modeled via Drucker-Prager and von Mises type plasticity. A parametric study is carried out to address the influence of various factors, such as soil friction approximation, dilatancy, effect of interface element and shear streng...

Subsurface Stresses in Rolling/Sliding Machine Components

Research on Elasto-plastic Contact with Friction Multipole BEM and Rolling Process

It is a highly nonlinear problem of 3-D elastoplastic contact with friction. To obtain the key information about the real size, displacement and traction in contact zone, the elements in contact and plastic zone should be subdivided. However, the increase of degrees of freedom is limited by the problem-solving scale when traditional BEM is used, for a larger memory size is required and the solu...