ELASTIC LATERAL BUCKLING STRENGTH OF TAPERED H-SHAPED BEAM UNDER SHEAR BENDING
نویسندگان
چکیده
منابع مشابه
Strength of arch-shaped members in bending and shear
Arch-shaped members are widely used for construction of tunnels, bridges, silos and shells. These members are not typically provided with transverse reinforcement and may thus have a brittle behaviour at failure. When subjected to bending or shear, traditional design methods used for straight members are not applicable due to deviation forces developing at the curved chords carrying compression...
متن کاملThe effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملA Survey on Buckling and Vibrations of a Viscoelastic Beam under Distributed Lateral and Axial Loads
In this paper, based on Kelvin and Linear Standard Solid models, dynamic response and the buckling load of a viscoelastic beam under lateral and axial loads have been determined. The governing equations have been extracted using Euler and Timoshenko theories and their analytical solutions have been obtained by using the eigenfunctions expansion method. Buckling load have been calculated by us...
متن کاملLateral buckling of web-tapered I-beams: A new theory
This paper presents a new theory for the lateral buckling of web-tapered I-beams. Linear analysis is first conducted by taking account into the tapering effects of web-tapered I-beams, where the deformation compatibilities of the two flanges and web are considered in terms of the basic assumptions of thin-walled members. Subsequently, the total potential for the lateral buckling analysis of web...
متن کاملStrength of small-diameter round and tapered bending members
An early focus on structural use of processed rather than round timber resulted in an underestimation of the structural advantages of retaining the natural form of small-diameter round timber. In the round and tapered form, timbers are not susceptible to the strength-reducing effects of diving grain and exposed juvenile wood. Fiber continuity around knots on the surface of a debarked log rarely...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2013
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.78.1493