ELASTIC BUCKLING BEHAVIOR OF LATTICED STRUCTURES WITH MEMBERS SUBJECTED TO LATERALLY DISTRIBUTED LOAD

The Effect of Opening on Elastic Buckling of Plates Subjected to Unidirectional Compression Load

This paper has investigated the effect of hole shape, hole size and hole position on elastic buckling of square perforated plates by using the finite element method. According to the effect law of these three geometric factors on buckling bearing capacity, buckling coefficient was obtained by data fitting. The results show that: The plate with circular perforation has the greatest buckling bear...

Buckling Behavior of Long Anisotropic Plates Subjected to Combined Loads

Simulation of the Reactive Powder Concrete (RPC) Behavior Reinforcing with Resistant Fiber Subjected to Blast Load

In research or experimental works related to blast loads, the amount of explosion material and distance of explosion point are very important. So, in this paper has been attempted to present a parametric study of the reactive powder concrete subjected to blast load. The effect of the different amount of TNT adopted the literature, distance of explosion point from RPC slab and also the location ...

Ultimate Load Capacity and Behavior of Thin-Walled Curved-Steel Square Struts, Subjected to Compressive Load

There have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. One set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. Different lengths of curved struts are fabricated so as to cover a practical ...

Axisymmetric Buckling Analysis of Porous Truncated Conical Shell Subjected to Axial Load

This paper studied Buckling analysis of porous truncated conical shell subjected to axial load. It is considered that a fluid undrained between porous material and the Porous material properties vary across the thickness of shell with a specific function also assumed that the edge of the shell is simply supported. The governing equations are based on the Sanders kinematics equations and the fir...