Elastic behaviour of magnesia-chrome refractories at elevated temperatures
نویسندگان
چکیده
منابع مشابه
Elastic Moduli Measurements at Elevated Temperatures using Ultrasonic Waveguide Embodiments
A measurement method is described here using a waveguide based technique with special modifications to the end of the waveguide in order to obtain reliable reflected ultrasonic signals from the end of the waveguide that is inside a heating chamber. The interpretation of the reflected signals leading to a quantitative measurement of moduli of the waveguide material i.e. Young‟s (E) and shear (G)...
متن کاملTHE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...
متن کاملIMPROVING HYDRATION RESISTANCE OF MAGNESIA-DOLOMA REFRACTORIES BYIRON OXIDE ADDITION
Abstract: There have been lots of studies to control the poor hydration resistance of dolomite refractories one of themost effective solutions has been the addition of magnesia to doloma. Using a co-clinker of magnesia-doloma as astarting material would provide more homogeneity in the properties of the product and has been published recently.On the other hand, addition of iron oxide to doloma h...
متن کاملHydrodynamics of a Gas-Solid Fluidized Bed at Elevated Temperatures Using the Radioactive Particle Tracking Technique
Effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated. Experiments were carried out in the range of 25-600 ºC and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. Time-position trajectory of particles was obtained by radioactive particle tracking technique. These data were used for determination of mean velocitie...
متن کاملMicrostructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures
The cold roll bonding of Al on AISI 304L stainless steel was carried out to fabricate the Al/304L/Al clad sheet composites. The maximum bond strength of 20 N/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. The microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materiali in tehnologije
سال: 2015
ISSN: 1580-2949,1580-3414
DOI: 10.17222/mit.2014.186