Efficient Asphalt Concrete Mix Compaction Modes by Vibrating Road Rollers
نویسندگان
چکیده
منابع مشابه
Study of Compaction in Hot-Mix Asphalt Using Computer Simulations
During the process of compaction in Hot-Mix Asphalt (HMA) mixtures, the distance between aggregate particles decreases as they come together and eliminate air-voids. By measuring the inter-particle distances in a cut-section of a HMA sample the degree of compaction can be estimated. For this, a calibration curve is generated by computer simulation technique when the gradation and asphalt conten...
متن کاملUtilization of Recycled Asphalt Concrete with Warm Mix Asphalt and Cost-Benefit Analysis
The asphalt paving industries are faced with two major problems. These two important challenges are generated with an increase in demand for environmentally friendly paving mixtures and the problem of rapidly rising raw materials. Recycling of reclaimed asphalt pavement (RAP) is a critical necessity to save precious aggregates and reduce the use of costly bitumen. Warm Mix Asphalt (WMA) technol...
متن کاملDynamic Rollers in Earthworks: Compaction and Continuous Compaction Control
The quality of earth structures highly depends on the compaction state of fill layers, which can be made up of a wide range of various materials. Compaction is usually accomplished by vibratory rollers; the vibration of the drum is generated by rotating eccentric masses. Moreover, dynamic rollers with different types of excitation have been developed in the last decades, including rollers with ...
متن کاملNcat Evaluates Warm Mix Asphalt
In addition to lower emissions warm mix asphalt has several advantages over hot mix asphalt such as fuel energy savings, decreased binder aging and an extended paving season (Photo courtesy: Matthew Corrigan, FHWA) The National Center for Asphalt Technology (NCAT) is evaluating warm mix asphalt (WMA) technologies. WMA technology allows the mixing, lay down, and compaction of asphalt mixes at si...
متن کاملInfrared Thermography Revolutionizes Hot-Mix Asphalt Paving
Hot-mix asphalt (HMA) surfaces comprise about 90% of the highways and roads in the U.S. Highways and are typically engineered to last 15 years or more, but many have been failing early due to potholes, cracks, raveling, and other problems. This premature road failure unnecessarily wastes millions of taxpayer dollars every year. This paper describes a series of research studies that were conduct...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1079/2/022012