Efficient and Low-Cost Surfactant-Assisted Solid Phase Extraction Procedure For Removal Of Methylene Blue Using Natural Dolomite
نویسندگان
چکیده
Abstract Water pollution results from rapid urbanization and industrialization which has harmful effects on human health. Adsorption is one of the most efficient processes to remove pollutants contaminated water. Natural minerals, such as dolomite, are widely spread around world may be easily collected in huge quantities. In this work, dolomite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive analysis (EDX) Fourier-transform infrared spectroscopy (FTIR), investigated for its applicability removal methylene blue (MB) aqueous medium a surfactant-assisted procedure. Using one-factor one-time approach, batch adsorption studies were performed establish best experimental conditions (pH, sorbent amount, shaking time, type concentration surfactant ionic strength) MB dolomite. At optimum (pH 8.0, time 90 min, 1.0 g L −1 0.1% w/v sodium dodecyl sulfate, 25 °C), maximum capacity 22.2 mg process obeyed Langmuir Freundlich isotherms. The findings show that effectively adsorbs used less expensive wastewater treatment MB. Graphical
منابع مشابه
Evaluation Low Cost Adsorbent of Walnut Bark Granule for Methylene Blue Dye Removal from Aqueous Environments
Background & Aims of the Study: Methylene blue (MB) is a risk for human and environment. Adsorption process is one of the removal mechanisms of MB. The purpose of this research was the evaluation of low cost adsorbent of walnut bark granule for MB dye removal from aqueous environments. Materials & Methods: In this experimental research, the effect of various operating parameters...
متن کاملSawdust as a natural and low cost adsorbent for the removal of brilliant cresyl blue dye from water samples
Sawdust which is the main waste from wood industry has been used as a raw material forremoval of Brilliant Cresyl Blue toxic dye. The effects of various parameters such as pH,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg L-1. The optimum condition for the studiedparameters was applied for various con...
متن کاملRemoval of methylene blue dye aqueous solution using photocatalysis
The nano sized TiO2 and ZnO are the most active photocatalysts. Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...
متن کاملRemoval of methylene blue dye aqueous solution using photocatalysis
The nano sized TiO2 and ZnO are the most active photocatalysts. Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...
متن کاملRemoval of methylene blue from aqueous solutions using modified clay
Introduction: Discharging of industrial colored wastewaters especially into aqueous environments can cause adverse effects on aquatic life due to their toxic natures. In this study, montmorillonite modified by hexadecyltrimethyl ammonium bromide (HDTMA-Mt) was used for the adsorption of methylene blue (MB). Materials and Methods: The influence of surfactant loading rate, contact time, pH, adso...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water Air and Soil Pollution
سال: 2023
ISSN: ['0049-6979', '1573-2932']
DOI: https://doi.org/10.1007/s11270-023-06363-z