Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading

Structural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading

This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...

experimental examination of intact and cfrp retrofitted rc beams under monotonic and high cycle fatigue loadings

the aim of this research is to investigate the effect of carbon fiber reinforced polymer (cfrp) composite fabric on monotonic and fatigue behaviors of reinforced concrete beams. to control the failure occurrence, a small notch was induced at the middle span in bottom surface for all of the studied rc specimens. totally 12 beams were tested from which 6 beams tested under monotonic and 6 other t...

Structural behaviour of RC beams with external flexural and flexural–shear strengthening by FRP sheets

This paper presents experimental research on reinforced concrete (RC) beams with external flexural and flexural–shear strengthening by fibre reinforced polymer (FRP) sheets consisting of carbon FRP (CFRP) and glass FRP (GFRP). The work carried out has examined both the flexural and flexural–shear strengthening capacities of retrofitted RC beams and has indicated how different strengthening arra...

Assessment of effectiveness of CFRP repaired RC beams under different damage levels based on flexural stiffness

Proposed Design Procedure of Nsm Frp Reinforcement for Flexural and Shear Strengthening of Rc Beams

Near-surface mounted (NSM) fiber-reinforced polymer (FRP) reinforcement has been found to perform efficiently as a flexural/shear strengthening technology for reinforced concrete (RC) members, while offering some additional practical advantages with respect to the most widespread technique of externally bonded laminates. This paper presents a design procedure for flexural and shear strengthenin...