Effects of using vortex tubes on events during cold start of a direct injection diesel engine
نویسندگان
چکیده
منابع مشابه
Effects of Direct Water Injection on DI Diesel Engine Combustion
The effects of in-cylinder water injection on a direct injection (DI) Diesel engine were studied using a computational fluid dynamics (CFD) program based on the Kiva-3v code. The spray model is validated against experimental bomb data with good agreement for vapor penetration as a function of time. It was found that liquid penetration increased approximately 35% with 23% of the fuel volume repl...
متن کاملDual Fuelling of a Direct Injection Automotive Diesel Engine by Diesel and Compressed Natural Gas
Application of Compressed Natural Gas (CNG) in diesel engines has always been important, especially in the field of automotive engineering. This is due to easy accessibility, better mixing quality and good combustion characteristics of the CNG fuel. In this study the application of CNG fuel along with diesel oil in a heavy duty direct-injection automotive diesel engine is experimentally investi...
متن کاملFuel Rail Pressure Rise during Cold Start of a Gasoline Direct Injection Engine
Gasoline direct injection provides reduced engine emissions, increased power, and increased fuel economy as compared to port fuel injection (PFI). Reduced emissions are largely due to starting the engine using high fuel pressure (up to 150 bar) and injecting into the compression stroke. During a cold start, fuel pressure must be increased from lift pump pressure (typically 4 to 6 bar) to desire...
متن کاملDual-Fuelling of a Direct-Injection Automotive Diesel Engine by Diesel-Gas Method
Use of liquefied petroleum gas (LPG) in compression-ignition (C-I) engines has always been considered important in the diesel engineering field. This is due to its easy accessibility and good combustion characteristics. In this paper the application of LPG fuel along with diesel oil in a direct- injection automotive diesel engine is experimentally investigated. In order to convert the pure dies...
متن کاملA Full-Cycle 3 Dimensional Numerical Simulation of a Direct Injection Diesel Engine
In the present work, multidimensional modeling of open-cycle process of OM355 engine was developed. Calculations for computational mesh were carried out. The results of the model were validated by experimentally measured in-cylinder pressure and the good agreement between calculations and measurements approved the trustworthy of numerical code. Results included pressure, temperature, emissi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Renewable and Sustainable Energy
سال: 2013
ISSN: 1941-7012
DOI: 10.1063/1.4798489