Effects of Surface Roughness in Elastohydrodynamic Lubrication.
نویسندگان
چکیده
منابع مشابه
Investigation of Couple Stress Fluid and Surface Roughness Effects in the Elastohydrodynamic Lubrication Problems using Wavelet-Based Decoupled Method
Abstract: The standard decoupled method with Newton-generalized minimum residual procedure performs poorly or may break down when used to solve certain elastohydrodynamic lubrication problems. The authors Zargari et al., 2007 presented decoupled and coupled methods in which the limitations of the decoupled method for some set of physical parameters and slight variation in these values (physical...
متن کاملElastohydrodynamic lubrication of faults
The heat flow paradox provides evidence that a dynamic weakening mechanism may be important in understanding fault friction and rupture. We present here a specific model for dynamic velocity weakening that uses the mechanics of well-studied industrial bearings to explain fault zone processes. An elevated fluid pressure is generated in a thin film of viscous fluid that is sheared between nearly ...
متن کاملHydrodynamic and Elastohydrodynamic Lubrication
Contents 1. Introduction 2. Stress-induced lubricant degradation 3. Basic equations governing the fluid elastohydrodynamic lubrication (EHL) of line and point contacts 3.1. Equations of fluid motion 3.2. Contact surface displacements in line and point lubricated contacts 4. Steady isothermal EHL problems for lightly loaded non-conformal line contacts 5. Steady isothermal EHL problems for heavil...
متن کاملOptical Characterization of Elastohydrodynamic Lubrication Pressure with Surface Plasmon Resonance
C.L. Wong1, X. Yu2, P. Shum3 and H.P. Ho4 1Division of Microelectronics, School of Electrical & Electronic Engineering Nanyang Technological University, 50 Nanyang Drive, 2Singapore Institute of Manufacturing Technology (SIMTech), 71 Nanyang Drive, 3Division of Communication Engineering, School of Electrical & Electronic Engineering Nanyang Technological University, 50 Nanyang Drive, 4Departmen...
متن کاملComparison of fatigue model results for rough surface elastohydrodynamic lubrication
The paper compares the results of applying different fatigue failure models to surfaces that experience elastohydrodynamic lubrication (EHL) and have surface roughness features which are large compared with the equivalent smooth surface film thickness. The surface profiles used for the comparisons reported are taken from test gear surfaces used in an FZG gear test. The surface has a roughness o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
سال: 1992
ISSN: 0914-8825
DOI: 10.1299/jsmec1988.35.535