Effects of Streamlining a Bluff Body in the Laminar Vortex Shedding Regime
نویسندگان
چکیده
منابع مشابه
Test and Verification of Vortex Shedding for a 3D bluff body
Testing of a 3D bluff body with and without end plate tabs was performed in the California Polytechnic State University 3x4 ft low speed wind tunnel. The CP values were obtained for the test case with no end plate tabs for speeds of 10, 15, 20, and 30 m/s. It was observed that stronger vortex shedding ocured at the higher speed test cases. The model was shimmed to be at approximately 5° angle o...
متن کاملVortex penalization method for bluff body flows
In this work, a penalization method is discussed in the context of vortex methods for incompressible flows around complex geometries. In particular, we illustrate the method in two cases: the flow around a rotating blade for Reynolds numbers 1000 and 10,000 and the flow past a semi-circular body consisting of a porous layer surrounding a rigid body at Reynolds numbers 550 and 3000. In the latte...
متن کاملElimination of vortex streets in bluff-body flows.
We present an effective technique for suppressing the vortex-induced vibrations of bluff bodies by eliminating the von Kármán street formed in their wake. Specifically, we find that small amounts of combined windward suction and leeward blowing around the body modify the wake instability and lead to suppression of the fluctuating lift force. Three-dimensional simulations and stability analysis ...
متن کاملEffects Of Frequency Variation At Inlet Flow On The Vortex Shedding Frequency Behind A Circular Cylinder
In many applications the flow that past bluff bodies has frequency nature (oscillated) and it is not uniform. This kind of flow has effects on the formation of vortex shedding behind bluff bodies. In this paper the flow around a circular cylinder was numerically simulated. The effects of frequency variation at inlet flow on the vortex shedding frequency were investigated. The transient Two-Dime...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluids Engineering
سال: 2019
ISSN: 0098-2202,1528-901X
DOI: 10.1115/1.4044830